--- title: "Using the Hunter NVRAM Board" type: "article" slug: "using-the-hunter-nvram-board" url: "http://localhost/article/using-the-hunter-nvram-board/" markdown_url: "http://localhost/article/using-the-hunter-nvram-board.md" published_at: "2026-11-21T22:03:37+00:00" modified_at: "2026-11-21T22:56:22+00:00" featured_image: url: "http://localhost/wp-content/uploads/2022/04/20230809-041332.jpg" excerpt: "Oh yes! I've lent my Hunter Board to NAZIR for his bank switching experiments. This means I haven't been able to actually use the loader program. I normally wouldn't print a routine which I haven't personally verified, but, as demand for these notes was urgent, here it is anyway. * NVRAM MEANS NON-VOLATILE RANDOM ACCESS…" post_tag: - name: "Full Text" slug: "fulltext" taxonomy: "post_tag" url: "http://localhost/tag/fulltext/" - name: "Hunter Electronics" slug: "hunter-electronics" taxonomy: "post_tag" url: "http://localhost/tag/hunter-electronics/" - name: "TS 1000" slug: "ts1000" taxonomy: "post_tag" url: "http://localhost/tag/ts1000/" - name: "Type-in program" slug: "type-in-program" taxonomy: "post_tag" url: "http://localhost/tag/type-in-program/" - name: "ZX81" slug: "zx81" taxonomy: "post_tag" url: "http://localhost/tag/zx81/" model: - name: "Sinclair ZX81" slug: "zx81" taxonomy: "model" url: "http://localhost/model/zx81/" - name: "Timex/Sinclair 1000" slug: "ts-1000" taxonomy: "model" url: "http://localhost/model/ts-1000/" indiv: - name: "Anthony Oresteen" slug: "anthony-oresteen" taxonomy: "indiv" url: "http://localhost/indiv/anthony-oresteen/" - name: "Paul Donnelly" slug: "paul-donnelly" taxonomy: "indiv" url: "http://localhost/indiv/paul-donnelly/" publication_r: id: 38992 title: "LISTing Newsletter" type: "periodical" url: "http://localhost/periodical/listing-newsletter/" authors: "P. Donnelly" issues_articles: - id: 78308 title: "LISTing Newsletter May – June 1985" type: "issue" url: "http://localhost/issue/listing-newsletter-may-june-1985/" pages: "19" pubdate: "May - June 1985" archive_link: false --- # Using the Hunter NVRAM Board Oh yes! I’ve lent my Hunter Board to [NAZIR](http://localhost/indiv/nazir-a-pashtoon/) for his bank switching experiments. This means I haven’t been able to actually use the loader program. I normally wouldn’t print a routine which I haven’t personally verified, but, as demand for these notes was urgent, here it is anyway. * NVRAM MEANS NON-VOLATILE RANDOM ACCESS MEMORY ### USING THE HUNTER NVRAM* BOARD If you’ve bought and built [Paul Hunter](http://localhost/indiv/paul-hunter/)‘s NVRAM board, but are having some trouble moving your basic programs down into the 8-16K areas here is a little BASIC loader to set up the transfer program. ``` 1 REM XXXX This serves no function yet - make sure it has about 60 or 70 X's. 9 REM now we set up a numeric variable N 10 DIM N (45) 15 Print "ENTER THE NUMBERS TO BE POKED, WHEN PROMPTED" 20 For I =1 to45 25 REM Enter in the numbers from Hunter's table starting with 17 and ending with the 201 which goes at 8289 30 Print "Memory Location"; 8243 + I;" will contain:"; 40 Input N(I) 50 Print N(I) 60 Next I 70 Stop 100 REM now check your results 105 Print "I ";"I+8243";"Contents" 110 For I = 1 to 45 120 Print I;" ";I+8243;" ";N(I) 130 140 Print "If Some of These Are wrong, then correct them as direct statements. E.g., By entering LET N(12)=33, if the code which was to go at location 8255 was not correct, etc." 190 STOP 200 REM now we do the actual Poking 210 For I = 8244 to 8289 210 Poke I, N(I-8243) 220 Next I 290 Stop 300 REM now new this Program out of existence 310 REM LOAD in your program (less than 6K, I hope) 320 REM and do A Rand USR 8244 330 REM A copy of your program will now reside 340 REM at location 9003 on your Hunter Board. 350 REM to Get it back, enter Rand USR 8269 ``` ``` Address Data Mnemonic 8244 17 125 64 LD DE (start of program area, 16509) 8247 42 12 64 LD HL (start of display file) 8250 183 OR A (clear carry flag) 8251 237 82 SBC HL, DE 8253 68 77 LD B, H and LD C, L 8255 33 40 35 LD HL (start of storage area; 9000) 8258 113 LD (HL), C 8259 35 INC HL 8260 112 LD (HL), B 8261 35 INC HL 8262 54 118 LD (HL), (code 118) 8264 35 INC HL 8265 235 EX DE, HL 8266 237 176 LDIR 8268 201 RETURN Address Data Mnemonic 8269 237 75 40 35 LD BC (size of progam) 8273 42 12 64 LD HL (start of display file) 8276 43 DEC HL 8277 197 229 PUSH BC; PUSH HL 8279 205 158 9 CALL routine at 2462 decimal 8282 209 193 POP DE; POP BC (note exchange) 8284 33 42 35 LD HL (start of storage area; 9002) 8287 237 176 LDIR 8289 201 RETURN ``` [Radio Electronics](http://localhost/periodical/radio-electronics/) – Aug.’83 Enter the program as listed and then RUN it (only run this program once, unless you want to start over completely). You will enter the 45 machine code numbers given in Paul’s documentation for the board. The program will then list the numbers you typed in and the memory locations to which they will soon be POKE’d. To do this, GOTO 100. If some of the bytes are wrong you can change them by either re-running the program (to do them all over) or use a LET command as described in line 140. Assuming all the values are correct, GOTO 300. The machine code necessary to transfer an entire BASIC program down to NVRAM and back again is now located in the NVRAM itself. Specifically, the transfer down routine begins at 8244 and the transfer back up routine begins at 8269. Your program itself will be put at location 9002 and those following. The “power” command being used here is the LDIR at either 8266 (to transfer down) or 8287 (to come back). This machine language command transfers as many bytes as you want (e.g., length of program), from one part of memory (the BASIC area starting at 16509) to another (in this case from 9000 on). Do note that the Real BASIC area and RAMPACK must be used to RUN a program, that is, you must move the program back to 16509 ff to use it. Also, and I had hoped most users realized this; the NVRAM occupies the space from 8-16K, thus, it is a maximum of 8K long. We’re using up the area from 8192 to 9000 for these and other routines. Therefore, the longest BASIC program, including saved variables, which can be placed in NVRAM is 16384 – 9000 or about 7300 bytes. So, if you have a program that is truly 16K – it just won’t fit. If your program is just a little too long, you can try compression techniques (e.g., delete all REMs, use variables (N=PI/PI for 1, etc, for numeric data) on your program before transfering it down. ### HOW IT WORKS Given that you’ve entered our program and Paul’s data correctly, the transfer code is ready and waiting down in the 8-9K area. To actually do your transfer do this: 1 LOAD the program you want to keep in NVRAM. 2 In the immediate mode, Peek 16404 + 256 * (PEEK 16405). This is E-Line, the end of the variable area. If this is greater than (16509 + 7300) 23800, or so, you have a problem and must reduce the size of the program or eliminate the variables. 3 Assuming your program is less than 7300 bytes long, now enter RAND USR 8244. A copy of your program now resides in NVRAM. 4 NEW your machine. 5 Now for the acid test. Press enter. No program there, right? Good! Now key in RAND USR 8269, and if all went well, your program is now back in the user area (16-32K) ready to run. 6 If you modify data, remember to SAVE a tape copy and transfer the new version down to NVRAM as in step 2 and 3 above. It will simply over-write the old version. @ 1985 P. Donnelly *** ### ZX-81 Pokes & Calls Use at your own risk! ``` Rand USR 0 clears program & restarts Rand USR 681 in FAST mode, prevents report code from display Rand USR 757 in FAST mode saves a program without a name Rand USR 836 in FAST mode, will load a program and STOP it even if it is self starting. Gives a C error code but disregard. Hit LIST and there is the program. Some MC programs initialize from the print buffer and you may not get a listing. I have seen only 1 program that did this (HOT Z-1) Most start with a RAND USR 16514. Rand USR 930 Equivalent to BREAK Rand USR 963 clears program area & variables (NEW) Rand USR 2955 equivalent to "," in a print statement Rand USR 3086 scrolls up one line Rand USR 3292 Equivalent to STOP Rand USR 3875 Equivalent to FAST Rand USR 3883 Equivalent to SLOW Poke 16418, 0 Makes a 24 line display (don't scroll or input = CRASH) Poke 16441, 20 Gives a 34 column display (careful, can cause CRASHES) Poke 16509, N N = 40 to 63. Makes editing hard; line # have letters. N=99 prevents program from running or listing, poke to 0 to restore operation. Poke 16510, 0 Makes first line number 0, can't be edited. Use for Copyright notice. To hide listing use the following Enter "1 REM aa", then POKE 16514,118 & POKE 16515, 118. Listing is gone ``` Capt Anthony J. Oresteen [address omitted], FT Knox, KY 40121 [phone number omitted]