---
title: "Using the Microace with Sinclair Accessories"
type: "article"
slug: "using-the-microace-with-sinclair-accessories"
url: "http://localhost/article/using-the-microace-with-sinclair-accessories/"
markdown_url: "http://localhost/article/using-the-microace-with-sinclair-accessories.md"
published_at: "2020-10-27T17:18:32+00:00"
modified_at: "2024-06-23T00:44:00+00:00"
featured_image:
  url: "http://localhost/wp-content/uploads/2022/04/20230809-041332.jpg"
excerpt: "Modifications to allow the Microace to use Sinclair accessories. The 16K RAM module is completely compatible with the MicroAce 1K Kit: the unit can be simply plugged on the back. 8K Basic ROM: the MicroAce kit comes with two track cuts on board, on both sides of pin 21 of the ROM chip. You also…"
category:
  - name: "SYNC"
    slug: "sync"
    taxonomy: "category"
    url: "http://localhost/category/periodicals/sync/"
post_tag:
  - name: "1981"
    slug: "year-1981"
    taxonomy: "post_tag"
    url: "http://localhost/tag/year-1981/"
  - name: "Hardware project"
    slug: "hardware-project"
    taxonomy: "post_tag"
    url: "http://localhost/tag/hardware-project/"
  - name: "MicroAce"
    slug: "microace"
    taxonomy: "post_tag"
    url: "http://localhost/tag/microace/"
model:
  - name: "MicroAce"
    slug: "microace"
    taxonomy: "model"
    url: "http://localhost/model/microace/"
publication: "Sync"
publication_r:
  id: 10243
  title: "SYNC"
  type: "periodical"
  url: "http://localhost/periodical/sync-magazine/"
volume: "1"
issue: "2"
issues_articles:
  - id: 26636
    title: "SYNC v1 n2"
    type: "issue"
    url: "http://localhost/issue/sync-v1-n2/"
pages: "10"
pubdate: "March/April 1981"
archive_link: false
volumeissue: "v1n2"
companies_articles:
  - id: 11104
    title: "MicroAce"
    type: "company"
    url: "http://localhost/company/microace/"
---

# Using the Microace with Sinclair Accessories

Modifications to allow the Microace to use Sinclair accessories. The 16K RAM module is completely compatible with the MicroAce 1K Kit: the unit can be simply plugged on the back. 8K Basic ROM: the MicroAce kit comes with two track cuts on board, on both sides of pin 21 of the ROM chip. You also need to make two links on the board.