--- title: "Tiny Print" id: 77532 type: "computer_media" slug: "tiny-print" url: "http://localhost/computer_media/tiny-print/" markdown_url: "http://localhost/computer_media/tiny-print.md" published_at: "2026-11-15T18:38:08+00:00" modified_at: "2026-11-15T18:38:08+00:00" author: "David Anderson" featured_image: url: "http://localhost/wp-content/uploads/2022/04/20230809-041332.jpg" excerpt: "Sets an Epson-compatible printer to tiny superscript print through the AERCO interface, for the Larken system." post_tag: - name: "LKDOS" slug: "lkdos" taxonomy: "post_tag" url: "http://localhost/tag/lkdos/" - name: "TS 2068" slug: "ts2068" taxonomy: "post_tag" url: "http://localhost/tag/ts2068/" model: - name: "Timex/Sinclair 2068" slug: "ts-2068" taxonomy: "model" url: "http://localhost/model/ts-2068/" indiv: - name: "Tom Skapinski" slug: "tom-skapinski" taxonomy: "indiv" url: "http://localhost/indiv/tom-skapinski/" genre: - name: "Printer" slug: "printer" taxonomy: "genre" url: "http://localhost/type/printer/" media_type: "Program" programmers: - name: "Tom Skapinski" slug: "tom-skapinski" taxonomy: "indiv" url: "http://localhost/indiv/tom-skapinski/" mediadate: "1991" article_media: - id: 23357 title: "Tiny Print" type: "article" url: "http://localhost/article/tiny-print/" - id: 23312 title: "Letter from Steve Gunhouse" type: "article" url: "http://localhost/article/letter-from-steve-gunhouse-2/" media_type_tags: "Printer" license: false --- # Tiny Print Sends superscript and narrow line-spacing codes to an Epson-compatible printer through an AERCO-compatible printer interface (OUT 127), so that everything printed afterwards comes out tiny; turning the printer off and on restores the normal size. George Chambers adds a version of line 60 that waits for the printer-ready value from IN 127 between codes (108 on his SCM Fastext 80). Listing only: it opens the Larken printer channel with RANDOMIZE USR 100 before sending the codes and returns to the disk menu with RANDOMIZE USR 100: NEW. Published in Sinc-Link January-February 1991 ([Tiny Print](https://timexsinclair.com/article/tiny-print/)). ## Source Code ``` 5 PRINT AT 10,5;">>>>TINY PRINT<<<<" 6 PRINT AT 19,0;" ---PRESS any KEY to CONTINUE" 7 PAUSE 0 8 CLS : PRINT AT 5,0;" RETURN to MENU ? (Y/N)": INPUT a$: IF a$="Y" THEN GO TO 95 10 REM by Thomas Skapinski [address omitted] 11/11/90 20 REM For LARKEN Disk System 30 REM Turn printer OFF then ON to resume normal print size 40 RANDOMIZE USR 100: OPEN #3,"lp": REM opens channel for large printer 50 REM 60 OUT 127,27: OUT 127,51: OUT 127,15: OUT 127,15: OUT 127,27: OUT 127,83: OUT 127,48: REM superscript and modified line spacing****AERCO COMPATABLE PRINTER INTERFACE REQUIRED**** 70 CLS : PRINT AT 18,1;"Now evrything will print out tiny. If you use an EPSON compatable printer" 71 PRINT FLASH 1;"***PRINTER MUST BE TURNED ON***": FLASH 0 72 PAUSE 350: CLS 90 STOP 95 RANDOMIZE USR 100: NEW 110 RANDOMIZE USR 100: SAVE "TINYpr.B2" LINE 1 Note by Geo Chambers (revised line 60): 50 REM 60 OUT 127,15: GO SUB 1000: O UT 127,27: GO SUB 1000: OUT 127, 65: GO SUB 1000: OUT 127,8: GO S UB 1000: REM This worked on an SCM FASTEXT 80 Printer ****AERCO COMPATIBLE PRINTER INTERFACE REQUIRED**** 1000 IF IN 127<>108 THEN GO TO 1000 1010 RETURN ```