2068 Video

See all articles from Sinc-Link v5 n1
Author(s): Fred Schakel
Publication: Sinc-Link
Pub Details: Sinc-Link v5 n1 (Volume 5, Issue 1)
Date: January/February 1987
Pages: 12

The RGB monitor on my 2068 provides excellent colour but, recently, I experimented with displaying a SCREEN$ on the family colour TV. This led to the discovery of several problems and the opportunity to find solutions to them.

Rather than uproot my 2068 from its web of cables and peripherals, I ran a long, shielded cable from the TV jack of the 2068 to the TV antenna terminals. With the TV being about 12 feet away, it was no surprise that the signal would have interference. Sure enough… the alphanumerics were mere blobs lost in a blizzard of noise. I guess the 12′ of cable and the home-made external keyboard and uncased modem and etc.,etc. all contributed to the interference which was never seen on the RGB monitor.

An amazing discovery saved the day! Enter… the VCR! The RF input on the VCR,where a camera is normally plugged in, is compatible with the MONITOR jack on the 2068. By connecting these, and setting the VCR input to LINE or CAMERA, the clean monitor signal is converted to a composite signal in the VCR and sent to the TV. The result was a very clean SCREEN$.

However, all my problems weren’t solved yet. Colours were the wrong shade and fading in and out. This apparently is a problem with cetain TV’s having a built-in converter and automatic tuning. Fortunately the 2068 has internal controls that can be adjusted to overcome the problem. Following,is a procedure that worked for me. It changes the monitor and TV signals but not the RGB output. NOTE: Before adjusting anything, note the position of each control and record it so that you can always set them back to original settings.

Now all I need is a wireless joystick for a complete remote station. I welcome any plans.

FRED SCHAKEL
London, Ont.