This column announces any software or hardware that is new or otherwise untested by us. If you have something of interest, send us a description of your product. We advise readers to send a SASE, as a courtesy, to the individuals or companies, for further information.
We know of several distributors that are supporting the QL as well as the other Sinclair computers. We have heard from the following suppliers to date:
Curry Computers
5344 W Banff, Glendale, AZ 85306
G. Russell Elec.
RD1 Box 539, Centre Hall, PA 16828
Sunset Elec.
2254 Taraval St., San Francisco, CA 94116
EZ Key
Suite 75, 711 Southern Artery, Quincy, MA 02169
Besides the above entries, we have also received new catalogs for all of the TS computers from the following companies:
E. Arthur Brown
3404 Pawnee Dr., Alexandria, MN 56308
Zebra Systems
78-06 Jamaica Ave., Woodhaven, NY 11421
Oxford Data
99 Cabot St., Needham, MA 02194
21st Century Elec.
6813 Polk St., Guttenberg, NJ 07093
RMG Enterprises
1419 7th St., Oregon City, OR 97045
Jack Dohaney
325 O’Connor St., Menlo Park, CA 94025
Aerco
Box 18093, Austin, TX 78760
John Oliger
11601 Whidbey Dr., Cumberland, IN 46229
Byte Back
Rt. 4 Box 54, Leesville, SC 29070
Tom Woods
PO Box 64, Jefferson, NH 03583
Budget Robotics & Computing
Box 18616, Tucson, AZ 85731
SyncWare Co.
Mtn. Stn. Box 12, Nelson, BC Canada V1L 5P1
There are so many new items available for you that there is just no way to fit them into one issue. We touch on the highlights here, but we suggest that if you did not get catalogs from the above list of suppliers that you take the time to request one from each. As we have stated in the past, continued support for you depends on YOUR interaction with vendors. Open communication channels with all of them. They will then keep you informed of the latest innovations on a timely schedule. To help defray their postage, please be kind enough to enclose a stamp.
Bruce Taylor of Budget Robotics, has written a soon to be published book (TAB #1935- “Build a Microcomputer Controlled Robot”) and will have all of the boards available for you to construct your own ZX powered robot.
Fred Nachbaur of the SyncWare Co. has the CE AMP program for the 1000. This graphic program aids you in your design of transistor circuits (see Load Amp SWN 2/5 pg. 8). $19.95 ppd.
Tom Woods has the 2068-32K NVM board for $109.95, 1000 Extended Basic $19.95, 1000 Wator Simulation, $16.95, and an Experimentor’s Universal I/O port for both machines for $69.95. Software for this board is available which allows passing data between the 2068 and 1000 for $16.95 and more.
John Oliger has his disk interface ready. It comes with his SAFE Disc Basic. Bare boards & Eprom, $43.95; Full kit, $97.95; assembled, $119.95. The operating system will have updates.
Jack Dohaney has a variety of 2068 programs and enhancments for Mscript and Tasword. Jack’s Fairware software includes Extended Basic, Keyword which allows you to type in basic keywords, Toolkit, Ezedit, and several Aerco Disk utility programs. They are $5.00 each.
21st. Century Electronics is selling the Memotech MTX 512 for $259.95. They also have an enclosed disk system for the 2068 with a Qume drive, controller with 64K ram and RGB output. The case will also hold your printer port inside. $559.95
Zebra Systems has a host of new software. The OS64 cartridge is $29.95. The Zebra Disk Drive is $299.95 and box of 10 disks is $39.95. The Greeting Card designer, which creates custom messages and prints them full size on an 80 column printer is $19.95.
Steve Wyatt, PO Box 6239, Washington D.C., 20015, has a Real Time Clock board for the 2068. It is battery backed and will even account for leap year. The Clock is available for $34.95 and includes driving software.
G. Russell Electronics has the Chromasoft program for the 1000 for $14.95. It includes a filter for your black & white TV or Monitor.
Tad Painter, Box 166055, Irving, TX has Voice software available for $16.95. He also has a variety of talking games and utilities.