Larry kenny has come out with a new EPROM DOS for his Larken system. We have only had tthis version for a few days, but Bob Mitchell has done a short review of it else where in this newsletter. Larry is offering this latest version of the EPROM for $5 plus S&H, plus your old EPROM. I happened to have five spare EPROMS around so I sent them to Larry along with $26 and asked him to send a set so that we cold upgrade some of our members systems. This has been done.
An interesting thing however. Two of the EPROMS that I sent to Larry were made by TI and were the type that have a “penthouse” (as Bill Jones calls it) on top of them. Sort of a raised area where the window is. Anyway, turns out that they would not work. At least they would not work until I connected a wire between pins 14 and 20, and bent pin 20 so that it did not enter the socket. Something like we experienced with the very first Larken cartridges. I see, also, reference to this sort of a problem in the Current issue of TS UPDATE where there is a note to the effect that”….apparently the EPROM with the “penthouse” on top cannot be used with the Larken cartridge.”
It’s not really a problem, just an interesting quirk. I’m sure that we will hear the whys and wherefores shortly.
Bob Mitchell mentions a small ‘bug’ in the PRINT routine. I have drawn Larry’s attention to it. It is not a real bug, but here’s how it comes about. In the Aerco printer drive (and maybe others) you have to poke in a number that is one less than the number of characters you want to be printed out on a line. That is to say, if you want a line with 64 characters in it, TASWORD style, you must POKE in a 63. It would seem that the new EPROM defaults to 64, instead of to the needed 63. It is still operational; you simply have to POKE a 63 into the DOS. When I spoke to Larry, he was unaware that the wrong number was in the EPROM. I’m sure it will be corrected promptly.
As I mentioned earlier, we have upgraded 5 systems in the club. By sending the five EPROMs out we were able to do this without anyone having to shut down their system, or to buy an EPROM they did not really have a use for. I mention this because if any other members are interested in upgrading by this process they should contact me forthwith and I will return my EPROMs for another go around. It will cost you $5.40. Plus your old EPROM,of course.