Letter from John Juergens

See all articles from Sinc-Link v11 n1
Author(s): J.E. Juergens
Publication: Sinc-Link
Pub Details: Sinc-Link v11 n1 (Volume 11, Issue 1)
Date: January/February 1993
Pages: 21-23

January 9, 1993

John E. Juergens
[address omitted]

Hugh H. Howie
QL Contact
[address omitted]

Dear Mr. Howie,

Have just about recovered from system(s) and outlook changes occasioned by our purchase of a Gold Card, a 3.2M drive used as FLP3 and PC Conqueror Gold SE (sometimes Digital lays it on their names a bit thickly.) I really don’t care to repeat that process of rearranging so many things.

However, do have some comments for any of your colleagues contemplating similar purchase(s):

1. Gold Card: The publicized 4 times speed-up is accurate for most of the work you wish speeded-up. For example, in running our Archive-based checking and tax program, the object …._pro file took 76 seconds before start-ing; with the Gold Card it takes 19.

Searching through a 650 record, 8 fields/record file for tax information, via FIRST, NEXT, etc., used to take up to 16 minutes; now, 3+ minutes.

Of the 2M of memory, actually available to me is about 3553 sectors.

The battery backed clock works, in contrast to another I had.

We still use QfLash in eprom and TQ+ with Quill and find no problem.

However, there is a bug: It takes the form of screen-display corruption. The best description I can give is that it looks as if the lighted pixels are being swallowed one by one by silicon bacteria.

Miracle was informed and they quickly responded with a newer ROM chip (free of charge) which was supposed to clear-up the corruption should it start. It did just that. If the corruption starts what one sees is a growing patch of black through the F1, F2 part (lower) of the start-up screen, followed by a turning back on of the turned-off pixels BUT, in turn, followed by the identical corruption. The bottom line is the fix did not fix it but does make for an interesting display if one is into that sort of thing.

The good news is that over 90% of turn-ons do NOT result in corruption and, of those that do, turning off the QL, waiting from 3 to 5 seconds, no more, and then turning it back on, results in a 99% success rate for me.

If the corruption is noticed at the F1 – F2 display there is no sense in proceeding; the corruption continues and ruins, at least, Quill and Abacus.

The problem is somewhat more than trivial but I can live with it for the speed and memory (about 1.7+M net) trade-offs.

2. The ED drive: If you read IQLR you will have noticed two recent articles on the Teac ED drive, the problems encountered and solutions found in getting it to work with the Gold Card.

On the basis of the IQLR, Nov/Dec 92. p. 137, article, I sent away to Midwest Micro for one. I can say that the settings recommended, p. 140, as well as the drive both work well.

However, I had another problem: I wished to use the drive as a semi-hard disk for both QL and PC-C files on FLP 3 or C: (the Gold Card supports 3 drives) and the Teac ED drive-select options are only DS0 or DS1, ie. FLP1 or FLP2.

The solution turned out to be something rather old and simple. An adaptation of IBM’s cobble to make it easy for a user to add a second drive to their single drive machines.

IBM apparently shipped their add-on 2nd drives set to DS0 – Drive Select Zero – (the QL equivalent of FLP1) and they sold or furnished a replacement ribbon cable with two edge-card drive connectors. If examined, the cable just before the connector to the 2nd drive was different. One would see that just before the edge-card connector for the 2nd drive, the 34 conductor ribbon cable was split into 3 parts.

The middle part, consisting of lines 10 through 16, maintained as a contiguous unit after being separated from the main cable about an inch, was given an 180 degree twist and then re-placed into the main cable, held there by the 2nd drive connector.

Effectively, this put the MOTOR ON line, #16, in the place of Drive Select zero line, #10, for the 2nd drive thus allowing somehow a 1 drive system to use a second drive.

I did approximately the same thing with our ED drive, separating lines 12 thru 14, consisting of DS1, a Ground line and DS2, reversing and replacing them. The important last step was making certain that the ED drive itself was set to operate as DS1 (FLP2).

Now, when FLP3_ is called for, the signal goes out on DS2 but, because of the 180 degree twist, it enters the drive on DS1 causing it to respond as FLP3_. Those clever IBM engineers! Line #1 of the ribbon cable line is the line closest to you as you sit in front of the QL; alternatively, line 34 is the line closest to the protruding Gold Card heat sink.

3. PC Conqueror Gold SE: Firstly, it should only be acquired about the time Lent starts as it has a distinctly penitential quality about it. Let me hasten to add that it is a tinkerer’s delight. By locking the user into nothing, one is free to make almost infinite choices about how to operate DOS on the QL. One has many more choices than a DOS machine user does about how what gets done when including multi-tasking a QL program along with a PC program should that prospect ever appear gratifying!

At its fastest it runs DOS applications at about the speed I remember our un-expanded QL ran Quill or Abacus. At its slowest, such as running our checking and tax program in Psions’s PC-4 Archive, it’s intolerable. Running Quill or Abacus from the PC-4 group is quite acceptable.

Some time ago, we had purchased two inexpensive word processors of the PC persuasion. One runs quite acceptably but the other would be much too slow for practical use. The worst of it is that I haven’t a clue as to why the large difference in speed exists. I do appreciate that Archive must needs run through several layers of programming before it gets to the emulator level. And, once there, it’s not home yet.

So much, it seems, depends upon the programmer and things you and I could not be expected to know or publishers to list. So, few if any rules can be made to guide a purchase. Shareware with its “test before you buy” feature should provide a partial solution.

On the positive side, purchasing PC-C beats having a number of large pieces of additional hardware cluttering up an already over-crowded computing and at 110 BPS, it’s cheaper than an actual PC even at today’s cut-throat prices.

Under PC-C, DOS is free to use about 700K for programs leaving about 800K free as LIM equivalent Expanded Memory, RAMDRIVE (VDISK), or whatever.

Although PC-C does support two DD and/or HD drives, it does NOT support ED drives as such. However, a user having an ED drive may use it as a psuedo-hard disk, ie. as drive C:, with up to 3.128M of space available and in conjunction with the other two drives, A: and B:.

The interesting thing about PC-C’s hard disk handling (real or pseudo) is that it convinces DOS that a file on a QL formatted disk is a DOS hard disk; enough so that a user must FDISK and FORMAT the disk (file) to use drive C:

Once through the convolutions of producing a DOS-useable hard disk, one may copy it, empty or full of DOS files, to another QL-formatted disk by the SuperBasic COPY command. Of course, WHERE one copies 3.128M TO is another problem for another day – sort of like the nuclear waste problem!

All in all, I’m extrememly doubtful that IBM or the clone makers are dreading the PC-C onslaught to their market share. But, exploring the great amount of PC shareware out there without an inordinate investment and on a machine with which one is familiar may seem worthwhile to some. Perhaps one may find a good program in PC land that has escaped the eye of a QL programer.

I seem to have rambled. Thanks again,

[signature]