Dear George:
The primary subject of this letter is the LARKEN RAMDISK. The LARKEN RAMDISK which has so many possiblities is; it seems to me; one of the least documented, least understood by its owners/users; myself included; and most underutilized plug-in peripheral produced for use with the TS-2068 computer by any manufacturer.
What I would like this letter to do is encourage you and all the other members of the TORONTO TIMEX-SINCLAIR USERS CLUB to set about the task of fully testing the LARKEN RAMDISK and generating & providing to the owners/users of the LARKEN RAMDISK boards the much overdue and needed specifications/data documentation and software/firmware to provide those same owners/users the best possible uses of the LARKEN RAMDISK.
Let me explain what I mean by “the best possible uses of the LARKEN RAMDISK”.
The first thing to be done is ascertain if any or all of the following LARKEN RAMDISK possibilities can be made realities.
<1> – Find the best methodologies possible for using the LARKEN RAMDISK as expanded bank switched RAM? What software/firmware is needed? Where can the software/firmware best be located within the TS-2068 computer system? Would the software/firmware best be located within the TS-2068 computer in HI-RAM or in the LARKEN DISK CONTROLLER I/O cartridge? Provide several software/firmware working location variations so users with differing system setups would all get the best results from their system setup whether they have only the LARKEN RAMDISK or have both the LARKEN RAMDISK and LARKEN DISK CONTROLLER I/O with its cartridge. All users would be able to get the absolute best possible working location and results from their systems.
<2> – Find a way to load and run 128 K SPECTRUM programs using the LARKEN RAMDISK as bank switched RAM.
<3> – Find a way to add/combine two or more LARKEN RAMDISK boards by plugging one behind the other to provide 512 K, 768 K or 1024 K etc. of usable bank switched RAM. Produce proper documentation for any rewiring that must done to add/combine two or more LARKEN RAMDISK boards together.
<4> – Find a way to add one LARKEN RAMDISK board to be used as a RAMDISK and one or more additional LARKEN RAMDISK boards to be used as banked switched RAM.
Please put these propositions before the TTSUC membership for me. Perhaps you could place an article in the SINC-LINK newsletter so that out of town members as well as members of other users groups, would be encouraged, to pursue alone or in concert with the TTSUC members solutions for turning the LARKEN RAMDISK’s possibilities into realities.
Please keep me informed as to what if any progress is being made in pursuit of the above noted goals by you or other TTSUC members as well as anyone you may be in touch with from other users groups.
Lastly a SPECTRUM computer question. Is it possible to to write a program to convert 128 K SPECTRUM sound chip programming to use the TS-2068 sound chip’s output instead? Is there any data available in the TTSUC’s library that describes the 128 K SPECTRUM sound chip and programming for it you can send me?
Thank you in advance for your help in the above matters.
Sincerely
Robert Shade