The Trump Card

Author(s): David Hoshor
Publication: Update Magazine
Pub Details: Update October 1988
Date: October 1988
Pages: 20

Re-print from ZX-APPEAL. Reprinted from the Jan/Feb issue of The Ramtop – the N/L of the Greater Cleveland Sinclair User Group

The Trump Card is simply the most useful single addition you can get for the Sinclair QL. It combines a disk interface, 768 kilobyte RAM expansion, Toolkit II for SuperBASIC extensions, a screen dump, static and dynamic ramdisks and a dynamic printer buffer. When you consider that even the lowest cost 512 Kb RAM expansion and a disk interface will cost at least $250, and Toolkit II costs $70, the Trump Card is a bargain at $309.95. The entire unit only sticks out about three inches from the expansion port side of the QL, so it’s compact. I got mine from Curry Computer in Glendale, Arizona.

The disk interface is pretty standard fare. It will allow you to store information on any combination of forty and eighty track drives, single sided or double sided, 5 1/4″ or 3 1/2″. The interface is fairly intelligent in that it will pick up on what format the disk was created in automatically. For example, if you have a 80 track, 5 1/4″ double sided drive, the interface will automatically read from a 40 track, single sided disk. Of course, you can’t make a single sided drive read from a double sided disk, or put a 3 1/2″ floppy in a 5 1/4″ drive since the interface can’t change the limitations of your disk drives. But if you have an 80 track 5 1/4″ double sided drive, you’ll be able to read any disk with the exception of 3 1/2″ disks. The interface is only able to support two floppy disk drives. That’s its only shortcoming as far as I’m concerned.

The 768 Kb RAM expansion maxes out the QL. Added to the 128 Kb that are built into the QL, you have a whopping 896 Kb of RAM. (While the 68008 CPU can address 1 Mb of RAM, 128 Kb of memory in the QL are reserved for device addresses and ROMs.) You’ll have room to run any program that has ever been written for the QL – probably several copies of the program. This can be very helpful on a multitasking machine like the QL. You’ll also have plenty of room for ramdisks too.

The ramdisking capabilities of the Trump Card are really neat. The ramdisks come in two varieties, static and dynamic. The difference is that the static ramdisk has to be formatted, almost like a microdrive cartridge, and the dynamic ramdisk can be created by just using the device name. For example, to create a static ramdisk with two hundred, 512 byte blocks of space, just enter:

FORMAT RAM1_200

A 100 Kb section of memory will be set aside for use by the machine to use just like a microdrive or floppy disk, but will be located in fast RAM. To create a file in dynamic ram, it’s just as simple as using the device’s name. To copy a file to ramdisk ram3_ just enter:

COPY dev_filename to RAM3_filename

A bit of memory will be set aside in RAM as ram3_filename. It will grow only large enough to hold the file(s) that have been send to ram3_. The difference between the static and the dynamic ramdisks is that the dynamic ramdisks are more likely to fragment the memory of the QL. If the memory becomes sufficiently fragmented, it can degrade the performance of the machine because the operating system will have to scrounge around to find blocks of memory. Up to eight ramdisks can used with the Trump Card. One other neat feature of the ramdisk is that it can make a very fast image of everything on a microdrive. It will copy everything on the microdrive in just about fifteen seconds.

One of my favorite features of the Trump Card is its printer buffer. It’s a snap to use and can really save time. In its simplest form, you just use the device name “PRT” instead of “SER”. What happens is that whatever you are sending to the printer is sent in its entirety to a buffer in RAM. The QL then sends bytes to the printer as a background task. The advantage to this is that you can return almost immediately to an editing session if you send a file to “PRT” from The Editor or Quill. If you send a file to “SER” from an editor, you must wait until the printer has finished printing before you can continue editing. Several files can be sent to the printer buffer and they will be sent in the proper order. There is a method of changing the device that you want to have the “PRT” device use. Unless you have a parallel interface that doesn’t use the serial port, it’s hardly likely that you’ll change it.

The printer dump is pretty good. It supports about any Epson dot matrix printer plus a few other printers including the Brother HR4, Olivetti JP101, Seikosha GP-100A, GP-250X, and GP-700A, and the Canon PJ1080A. You can specify what section of the screen to copy, and there is a provision for using a “hotkey” to copy any screen from any program that you might be running. There’s also documentation on how to open a printer device and get a printer dump from programs written in near any computer language – not just SuperBASIC. I’ve tried it from “C” and it does work.

Toolkit II is a collection of SuperBASIC extensions. Some of them are much more useful than others, but on the whole, they are very worthwhile. To me, some of Toolkit’s most useful commands are “ed”, a screen based SuperBASIC editor; “wcopy”, a file copier that allows the use of wildcards; “wstat”, a wildcard directory command that also provides the file size and last update time of files; “splf”, another printer buffer or rather “spooler” that works great when used with “prt”; and an assortment of job control commands that allow the user to monitor, change the status of, and remove jobs that are the in the QL. Toolkit II allows the use of default directories, has clock features including alarm clock(s), has improved SuperBASIC error handling, permits the user to define “hotkeys”, altkey/single key combinations to enter large strings or commonly used commands, and has an easy way to repeat of the last command typed. Some of the more obscure commands deal with networking, direct unbuffered access to the various i/o devices, and memory management commands. All in all, its a pretty impressive array of extensions to SuperBASIC. Once you start using the Toolkit II commands, you’ll never want to use a machine without them. An additional benefit of having Toolkit II fitted on the Trump Card is that it leaves the ROM cartridge slot on the back of the QL free for other ROMs.

When you consider the features that the Trump Card offers, I feel that it is an unbeatable combination.