The Xchange Version of Quill

See all articles from Sinc-Link v11 n1
Author(s): Ron Blizzard
Publication: Sinc-Link
Pub Details: Sinc-Link v11 n1 (Volume 11, Issue 1)
Date: January/February 1993
Pages: 26-27

Although Quill is old, most QL owners still use it, at least part of the time. It is a very good general purpose word processor. The enhancements in version 2.35, especially when running with Athene’s Turbo Quill+, has made the program a lot less buggy and much more responsive. With the Gold Card, I am told, the speed is greatly increased. But there are still shortcomings.

Quill has no Block Copy and Save feature or Global replace command. Nor does it have a mail merge feature. But Quill’s biggest omission, in my opinion, is its inability to import most ASCII files. (Yes there are ways to get around this, but they are cumbersome.)

Text87 and Perfection can overcome these problems, but they are fairly expensive and there is a learning curve. Another solution is XCHANGE.

XCHANGE is a disk version of the set of four PSION programs that came with the QL. It allows all four programs to be loaded simultaneously. Using the F6 key (shift F1 with the QL) the user can switch from one application to the next. Several documents can be loaded at once. The amount of memory is the only limit to the number of PSION applications available.

I’ll concentrate on the changes in Quill, but XCHANGE includes a Task Sequence Language (TSL) that allows a programmer to control interplay between the various applications. It also has 3D charts in Easel and a one-step command to export Easel, Abacus or Archive files and import them into Quill.

The version of XCHANGE I use is 3.87 (copyrighted in 1987). I am told that it was hacked over from the THOR. The only documentation I received was some pages from the reference manual dealing with the MAIL subcommand and the GLOSSARY feature. Also, on the disk, was a short Quill_DOC explaining how to use the Task Sequencing Language. Five sample _TSL programs, which appear to have been part of a longer tutorial, where also included on the disk. With the PSION F1 help feature, the above documents are enough to figure out most features.

XCHANGE requires the Toolkit II extensions. Once loaded you are presented with the taskswtiching screen. There are several commands available using F3. You are also allowed to scroll to one of the four PSION programs and enter it. If you push the ENTER key with the Quill label highlighted (for example) you are prompted for a TASK name. Type a name, press the enter key and you are in Quill. To open more Quill applications, press F6 (shift F1), scroll down to the Quill label, enter and use a different task name. Press F6 to switch between applications at any time.

Once in Quill you will be in familiar territory. There are a few apparent minor differences. For example, to change from Insert to Overwrite it will say press F9 (which is shift F4). There is a block for F6 (XCHANGE) and there is a task name at the bottom. Help is still available at all times by pushing F1. F3 gives you the commands, and prompts are turned off and on with the F2 key. The only added command is EXTRACT, but there are several additional subcommands and we’ll get to those in a minute.

EXTRACT allows a block of text to be highlighted, then saved to be merged with other documents at a later time. SEARCH and REPLACE have the following enhancements. They both now give the option of beginning at the TOP or defaulting from where the cursor is. REPLACE also prompts with “Yes, No or All?”–which allows global replacements. SAVE now asks to overwrite with an “OVERWRITE, YES?” prompt instead of requiring the user to push “Y.” There are several other enhancements of this kind.

There is also a GLOSSARY feature that allows the user to predefine a set of commonly used keystrokes. This is similar to the one used in Turbo Quill+, even making use of the F5 key. Any letter or number can be defined and up to 250 keystrokes can be entered for each definition or “glossary.”

The most important changes are in the FILE command. No longer will you find FORMAT, BACKUP or COPY. (BACKUP and COPY are two of the commands in the XCHANGE front end–FORMAT is no longer available from within XCHANGE.) These commands are replaced by the following: IMPORT (enhanced), EXPORT, MAIL and TRANSFER. These changes are, to me, the key advantage of using Quill under XCHANGE.

IMPORT now imports any ASCII text file, allowing many more extensions than _LIS. This saves the hassle of having to change the file name’s extension. Import can be used to view TSL programs, SuperBASIC programs, Glossary definitions, etc. It also can be used to import text from other computers that has been brought over through the serial port, with DiscOver, or by using some other transfer program.

EXPORT makes an ASCII file with only carriage returns and line feeds at the end of each line. This is very nice for uploading files to Bulletin Boards. One disadvantage of EXPORT, since it puts line feeds and carriage returns at the end of each line, is that it can’t be directly used for editing SuperBASIC programs. Either a filter program could be used to overcome this problem, or the old solution of making a special printer_DAT and saving to a _LIS file. The default extension with EXPORT is _EXP. If you use _TSL instead, the file is treated as a TSL program. This means you can write a TSL program, XCHANGE tasks, try it out, then return with the XCHANGE command and continue writing the program.

TRANSFER also makes ASCII text files. Its purpose is to allow Quill documents to be transferred to another type of computer using Quill (an IBM PC, for example) without losing the formatting and typestyle commands. It does this by using ASCII characters to define the control codes. Once the document is transferred it can be saved in the regular way and nothing is lost. TRANSFER prompts the user either to Save or Load when the subcommand is chosen.

MAIL is the most complicated of the FILE subcommands. It allows personalized form letters to be printed. It does this in one of three ways. Codes can be inserted into the standard document that promt the user to type information from the keyboard when each letter is printed. Or codes can be embedded in the standard document allowing the information to be supplied by either a specially prepared Quill document or an Archive _EXP file. The ARCHIVE _EXP extension is the default.

I’m very impressed with Quill in the XCHANGE program. The ability to open two or more documents, extract what you want from one and load it into the other document is nice. There is multitasking software that allows task switching, but none that uses the enhanced version of Quill. I’ve used Turbo Quill+ by Athene for several years and am very happy with its increased speed and smoother “feel.” The XCHANGE version of Quill seems about as fast and smooth as Turbo Quill+. In addition, it has the added FILE subcommand features.

If anyone would like more information about XCHANGE, please write. I’m told that Sharps still has a couple copies available for $60, but I’m disappointed that a complete manual is not provided.

Ron Blizzard
[address omitted]