The Z-Link Interface … a synopsis

Author(s): Dave Clifford
Pub Details: Time Designs Magazine v1 n3 (Volume 1, Issue 3)
Date: March/April 1985
Pages: 14-15
The Z-Link Interface card with a TS 2068 and an EMU-1 cartridge
The Z-Link Interface card with a TS 2068 and an EMU-1 cartridge

Simply put, the Z-Link Interface Card is a “plug-on” device that re-configures the peripheral I/O port connector pin-calls of the Timex/Sinclair 2068, to match that of the Sinclair ZX Spectrum Microcomputer, and thus making the TS 2068 “HARDWARE COMPATIBLE” with Spectrum peripherals.

The Z-Link makes available to the peripheral, all required address and data lines, as well as “hand-shaking” and “house-keeping” control lines required by the Z-80 CPU. The Z-Link also supplies the two additional supply voltages (+12v and +9v), via two type LM-78 series 3 terminal regulators.

The regulators are filtered with temperature-stable tantallum capacitors to guard against noise and “self-oscillation” (an inherent problem that is “overlooked” by many commercial designers), until the system is switched-on. As with all digital systems, the secret to successful circuit operation is good connections, a common ground return, liberal distribution of by-pass capacitors, and a “quiet” power supply!

That describes the Z-Link Interface Card. NOW, you are wondering what it’s uses are. I could say that it will “RUN ANYTHING” (but that would be both un-fair and inaccurate in my book). I will however describe the systems and peripherals that I HAVE and DO USE…AND USE EVERY DAY!

But first, I want to say something about “EMULATORS”, and clear the air about these devices. Without getting too deep into the subject itself (it would take the entire magazine), it is here that I will say that YOU NEED ONE to use Z-Link…but which one?

There are two basic “types”, the first is known as “The Spectrum Emulator” or EMU-1, brought to life by Doug Dewey (The Triangle T/S Users Group), and consists of a 128k EPROM that is mounted on a p.c. card that is fitted into the TS 2068’s Command Cartridge Port. The second is known by the trade name: “The ROMSWITCH” (editor note-see review in Jan/Feb 85 issue of T.D.M.). This one consists of an actual Spectrum ROM, mounted on a p.c. card with a second socket for placing the TS 2068’s “home ROM”, then the entire assembly is fitted inside the 2068 (plugged into the “home ROM” socket).

The DIFFERENCE between the two is the ROMSWITCH is manually switched-in, and becomes the 2068’s sole “operating system”…some control keys and built-in hardware become “transparent”, because the Spectrum ROM does not contain the “instructions” for their support (i.e. SOUND, FREE, STICK, and the cartridge port).

The type EMU-1 and EMU-2 however “sits” in the cartridge port and is “BOOTED” into play by the 2068’s home-ROM. But what really makes the difference is that the 2068’s “SHADOW-ROM” is brought on-line as well. It is this SHADOW-ROM that contains the instructions, that enables the TS 2068 to “commucicate” with the “smart” peripherals like the Interface-1 and Microdrives, or the Rotronics Wafadrives, with the “help” of the EMU-1 acting as an “interpreter”…and thus “EMULATES a Spectrum”.

And now the peripherals!!! With space being at a premium, I will discuss the operation of two of the “most popular” systems that seem to have the majority of users “baffled”, the ZX-Microdrives and the Rotronics Wafadrives.

I have had the Sinclair ZX Interface-1 and two ZX Microdrives ON-LINE since October ’84, and have used the system extensively. I do all of my word processing with Tasword-II installed on Microdrive Cartridges, and have just installed Masterfile…(FANTASTIC!). But the drives themselves are only PART of the system. The Sinclair Interface-1 also has an RS-232 interface, as well as a unique L.A.N. (Local Area Network) for “networking” up to 64 Spectrums (or 2068’s), that are also fitted with the Interface-1. (There are five users here, in the South Bay TS User’s Group that are presently running the Interface-1 and Microdrives, and sometime when we can all get together, I would like to try a game of HUNTER-KILLER on the L.A.N.)

The second system that I have just received from the United Kingdom, is the Wafadrives. This is a “twin” drive system custom manufactured by BSR (the well-known audio people) for a company called ROTRONICS. I have had this system on-line for the past two weeks and it is a VERY user-friendly sytem. When brought “on-line” it sports it’s own operating system, and has commands VERY similar to CP/M. In fact, Rotronics refers to the operating system as “W.O.S.” (as opposed to CP/M’s DOS). On top of having two 128k drives, the Rotronics Wafadrive also has an RS-232 AND a Centronics Interface BUILT-IN!!! I even use the Westridge 2050 Modem with the Wafadrives! (Yes, the 2050 Modem is plug-compatible with the Sinclair Spectrum. Even MTERM II runs on the Spectrum. However, when you go back to BASIC, you will crash. This is due to MTERM’s call for BASIC. Machine Code hackers…get out your “HOT-Z” or “DISA-Z” and go to work!)

The above systems are operated with the Z-Link Interface and the EMU-1 (or EMU-2), as supplied by Doug Dewey.

WHAT’S NEXT??? I am WAITING for one of two interfaces from the U.K., that support STANDARD 5¼ floppies. Gaze through a copy of ZX COMPUTING sometime and let your imagination “FLY”. (The prices will amaze you too!) I just wish that Mother England had and equivalent to U.P.S. Blue Label…(at the same time, I’m glad she does not!)

The Z-Link is priced at $49.95 and is available from: TEJ COMPUTER PRODUCTS, 859 North Virgil Ave., Los Angeles, CA, 90029.