ZX81 Resources

See all articles from Sinc-Link v10 n5
Author(s): Rene Bruneau
Publication: Sinc-Link
Pub Details: Sinc-Link v10 n5 (Volume 10, Issue 5)
Date: September/October 1992
Pages: 11-12

17 August 1992

64K UPGRADE

I have revised the 64k SRAM board to provide non-volatile memory above 32K. A revised component list, printed circuit, and layout are provided on the next page. If you have code or data above 32k that is to be protected, you should enable WRITE PROTECT before you turn the computer off. Turn off the write protect to modify data or run machine code that uses this area to store data. By the nature of the board design, the 8-16k block is also non-volatile, but is not protected from erasure or scrambling that could occur when the computer is turned on or off, or crashes.

Where Do Old ZX81 Programmers Go?

Having been introduced to computing through the ZX81,2068 or the QL, many users are ‘upgrading’ to the XT, or more likely, the 386 AT, selling off or putting their old systems in storage. I have no doubt that most users retain a lot of affection for their old computers. Over the last year or so, I have seen a number of Sinclair Emulators appear on the bulletin boards for Amigas and IBM clones, written by ex-Sinclair users, of course. Most recently, I downloaded an emulator for the ZX81 called Xtender, written by an old ZX81 programmer by the name of Carlo Delhaz. For those who remember, Mr. Delhaz published several programs in the magazine ‘Your Computer’ around 1983-1984.

The program will run on an XT, but a faster machine is preferred. The emulator is quite impressive, in that the display and keyboard work exactly like the ZX81. A suite of programs is included in the package. An added bonus is a complete DOS to access directories and files on the resident computer. For those who are interested in getting a registered copy of Xtender can write to:

Carlo Delhez
Emmastraat 3
4651 BV Steenbergen
Netherlands

Enclose 50 Guilders (about $38.00 Can) and be sure to ask for documentation for the ZX81 programs that come with the emulator.

INSIGHT

Many people, myself included, tend to view computers, VCR’s and other electronic apparatus as black boxes. You turn them on, push some keys and they do what you want them to do….sometimes.

Once in a while you see something that gives you an insight into the inner workings of the machine. Not long ago, I picked up Mike Lord‘s ‘Exploring The ZX81‘ and was reading through the section on how the display was generated. In a nutshell, The ULA (Undefined Logic Array; this is the chip closest to the TV modulator on the computer board) chip forces the Z80 chip (the CPU) to stop processing by issuing a HALT command. Because the Z80 was originally designed to work with dynamic ram (DRAM), it has provisions to refresh the ram automatically regardless of the halted state. It does this by cycling through the memory addresses and issuing a REFRESH signal. The ULA utilizes this feature to access the display file and character set to generate the TV display. Absolutely Machiavellian! Having just completed the 64k SRAM board, I suddenly realized why the RFSH line was ORed with the RD line to the static ram. When Hi-Rez basic is in operation, the SRAM is activated every time that REFRESH or READ is activated. With the code written by Wilf Richter, the ULA reads the SRAM rather than the character set in the ROM giving a true high resolution display. It is a pity that SRAM was so costly when Sinclair’s design team made the ZX81 in the early 1980’s, else we would have had Hi-Rez right from the beginning.

INSTANT PCB

In the past, we have spoken about a product called TEC-200, a mylar sheet that allows you to transfer a photocopy of a printed circuit to copper for etching. One difficulty in using the mylar is in getting a good transfer to the copper all the time. A new product that has just been introduced promises to eliminate this. It is a specially treated paper that releases the photocopy when soaked in water. The transfer method is the same as with TEC-200. Spraying the photocopy with lacquer gives you a transparent decal for face plates, keytops, etc. For $9.95 (US) plus $4.00 UPS you get 5 sheets of the paper. Write to DynaArt Designs, 3535 Stillmeadow Lane, Lancaster, CA 93536. Ask for Item TTS-5.

64K SRAM – Component List

Item              Component         Comment

U1,U2             62256,43256       Static Ram
U3                74LS145           Decoder
Q1                2N2222            NPN Transistor
D1,2,3,4,5        1N4148            Signal Diode
R1,2,3,6,7,       2.2K              1/4 watt resistor
R4,8              4.7k              1/4 watt resistor
C1                10uF              Tantalum Capacitor
SW1,SW2           SPDT slide
SW3               SPST toggle
SW4               SPST toggle       Momentary on
B1                2 AA Battery      Holder
Component Layout (Not to Scale)
Component Layout (Not to Scale)
PCB Layout (Not to scale)
PCB Layout (Not to scale)