Loading and saving to tape could be very challenging for Sinclair owners. The TS 1000 required an audio signal of sufficient volume and tonal quality to load software. Most portable cassette recorders that owners used were up to the task but, often as not, owners encountered head alignment issues that added to their frustration.
A number of vendors offered devices to help find the right volume level; G. Russell Electronics’ Winky Board was a very popular solution.
Other vendors took tape storage to an extreme, offering devices that could control multiple tape decks with program and data saving to two different units.
Eliminate swapping of plugs when LOADing and SAVEing programs on cassette. Single switch selection of TALK, SAVE, CUE, and LOAD modes.
TS 1000
Eliminate swapping of plugs when LOADing and SAVEing programs on cassette. Single switch selection of SAVE, LOAD, and AMP modes. Built in amplifier and loudspeaker boosts sound output.
TS 2000 TS 2068
Digital VU meter. Hooks up in seconds outside the computer; helps ensure proper loading level.
TS 1000
Schematic for precision setting of cassette output level.
ZX80 TS 1000
Documentation packet that covers troubleshooting tips and plans for LOAD monitor and signal filtering.
TS 1000
Tape loading aid. Accurate volume control setting, easy tape cueing, use remote feature.
TS 1000
Multipurpose tape loading aid assures LOADing. Features extremely sensitive, reliable microammeter. Output for earphone, amplifier, or duplicating.
TS 1000
Removes guesswork from adjusting cassette recorder volume. Optimum level attained when red and green LEDs flash in unison. Plugs between computer and recorder.
TS 1000
Calibrated distortion free tape loading amplifier for all tape machines. Triple LED displays for low, normal, overload. Connects between tape player and computer.
TS 1000
LOAD/SAVE a full 16K in 29 seconds (16 times faster). QSAVE amplifier/filter unit plugs between recorder and computer. A data transfer rate of 4000 plus baud vs 250 on the standard TS 1000.
TS 1000
Allows control of the SAVE and LOAD leads as well as the tape motor for one or two tape recorders. Relay isolation from the computer allows control of 110 volts AC 1 amp from the unit. Also has a built in 5 bit port (6 if only one motor relay fitted). Outputs can be used
TS 1000
Cartridge and flexible extension cable. Program in ROM speeds up load, promised to load a 5 minute program in 20 seconds.
TS 1000 TS 1500
Eliminate the frustration of tape loading. LED indicators show high volume or low/noisy tape. Earphone plug lets you monitor tape while loading. Reset switch. Save/Load switch allows both to be connected.
TS 1000
Helps align mono cassette recorder head for best results, check tape speed and path.
TS 1000
Small modification reduces RAM pack noise at the signal source. Kit and instructions. 16K.
TS 1000
The 2020 cassette recorder was one of several peripherals matched the 2068 in design. A variation was also sold by Radio Shack as the Minisette-9.
Three step LED meter that monitors tape loading level with just a glance. Plugs inline between the computer and the tape player.
TS 1000
Monitors tape output level; gives a positive SAVE induction; detects blank tape without disconnecting cassette wires.
TS 1000
Standard cassette recorder modified for computer control. Offers file directory, read/write from programs. Uses endless loop tapes.
ZX80 TS 1000
Passive filter that plugged into the cassette tape recorder to produce easier tape loading. Supported other functions such as a tape duplication and listening via earphone.
TS 1000
Tape interface that filters noise when saving for clean, easy loading tapes. Duplicate any cassette —even normally unsavable cassettes. Save on two cassettes simultaneously. Monitor signal via earphone to set optimum tape volume.
TS 1000
The Winky Board 2000 brought the same features of the Winky Board to TS 2068 users. It provided visual feedback of signal level, a jack for monitoring the signal itself and was a tool for duplicating cassettes as backups.
TS 1000 TS 2068
The Z-DUBBER is an interface between the Sinclair computer and its cassette recorder which allowed even the most difficult cassette program to load more easily. Additionally, the Z-DUBBER allowed you to connect two cassette recorders to create perfect backup copies of your programs. The Z-DUBBER operated on two AAA cells.
ZX80 ZX81 TS 1000 TS 2068
Cassette loading interface with VU meter. Reduce program load errors to a minimum by pre-setting your tape recorder to the level that is compatible with the computer.
TS 1000
Power driven cassette loading interface. This unit uses the power pack to test audio level and gives a red or green signal to indicate the proper setting for the computer.
TS 1000
Automatic tape control (up to 4 units) and RS-232C printer interface. Built-in USR commands provide program control over the cassette recorders and features such as “Tape to Tape Copy” or program list.
TS 1000