Exclusive Interview: Nigel Searle, “Sinclair Insider”

Author(s): Tim Woods
Pub Details: Time Designs Magazine v4 n6 (Volume 4, Issue 6)
Date: September/October 1988
Pages: 10-15
Nigel Searle at the lectern (left)
Nigel Searle at the lectern (left)
Nigel Searle at the lectern (right)
Nigel Searle at the lectern (right)

It was very early on a Sunday morning, and it was pouring down large rain drops, quite warm and humid, but drenching indeed. Perhaps the weather was fitting for the occasion…similar to the climate of Great Britain, the homeland of my distinguished breakfast guest (and certainly of the Northwest where I reside).

This was the second day of the Midwest Sinclair Conference in Cleveland, Ohio. The previous day, I had sat in on a very interesting seminar on the history and development of Sinclair microcomputers, conducted by Nigel Searle. Nigel had worn several hats in the Sinclair hierarchy, including top executive, second in command, right under company founder Clive Sinclair; and then later, the U.S. Marketing Director of Sinclair Research in Boston.

I guess that I have always had this preconceived notion, that Sir Clive Sinclair was this very proper “stiff-lipped” English inventor; but Nigel quickly shot down this view during his lecture. Nigel has known Clive for over sixteen years, both as a business associate and as a close friend. Nigel related several humorous stories, including Clive’s antics at a company Christmas party, about an incident in a pub, and his dealings with British bankers. One year, when the Ministry of Education denied approval of the Sinclair ZX81 for use in the primary schools (but instead granted approval to Apricot, a competitor), Sinclair re-submitted a “brand new” model, the Spectrum. But unknown to the Ministry, was that this particular computer submitted for review, actually had a ZX81 mother board installed inside! The “new” computer was promptly approved.

During the early years with Sinclair, Nigel found himself frequently commuting to the United States. At first, working with Texas Instruments, to program a custom chip that would be used in a Sinclair scientific calculator; and then later, to promote new Sinclair computers.

Currently, Nigel resides in the U.S., and is the owner and operator of The Marketing Clinic in Keene, New Hampshire, a public relations and marketing firm. He also helps produce a weekly radio show on personal computers, heard in the New England area.

Nigel continues to work with Sinclair in an outside consultant capacity, and was brought in to help SSI (and other affiliates of CAMBRIDGE COMPUTER-North America) promote the new Z88 portable computer, and future computer product releases.

Nigel, without hesitation, generously agreed to do an interview for TIME DESIGNS. To reminisce about the “early days” of Sinclair computers (including the QL, which for the most part, was his project), and to offer a few clues as to what we can expect from Sir Clive in the not so distant future. And so, over breakfast, the following exchange occurred.


Tim: First of all, for those TIME DESIGNS readers who weren’t fortunate enough to attend your lecture here in Cleveland on the “history of Sinclair computers”, let’s go back a bit. What were your “roots” (like the Alex Halley novel)? How did you become a member of the Sinclair “legacy”? Basically, how did it all begin?

Nigel: It actually happened through an organization known as MENSA, which I had become a member of, when I was in college. When I was about to graduate, someone who I knew through MENSA, introduced me to a guy called Tim Idelwatt, who had started his own company in Cambridge, England. And as a result of that meeting, I was offered and accepted a job with Tim’s company. Tim was a friend of Clive Sinclair, and through Tim, I met Clive who also happened to be a member of MENSA.

I worked for CAMBRIDGE CONSULTANTS, Tim’s company, for a couple of years then decided to leave the company and work on my own. I guess that I felt they were paying me relatively little. All they were providing me with was a pencil and paper, and a place to sit, and then they were charging clients about five times as much as they were paying me. And I’d also, because of the circumstances under which I had gone to work there, I’d been thrown into the position where I had to find clients myself. And so I figured I could do it just as well on my own. Shortly after I left Cambridge Consultants to work on my own, I got a phone call from Clive Sinclair asking me if I was interested in working on a calculator. That was in the middle of 1972. Right at that time, SINCLAIR RADIONICS was bringing out its first calculator called the “Executive”, but Clive already had plans to work on a scientific calculator, and that was the first project I worked on.

For quite a while there, I wasn’t a full time employee. I’d made the big break and decided that I wanted to work for myself, to work as a consultant. Although I had an office at Sinclair, and spent quite a lot of time working on that project, I didn’t work there full time and I worked on other projects for other clients as well. It (the calculator) was certainly the major thing that I was working on for a few years there.

Tim: How long had Sinclair Radionics been around before you joined on?

Nigel: Sinclair Radionics had been around for almost ten years, and had been doing mainly audio, started selling parts initially, amplifiers, kits, and later, just before I joined them they started selling speakers and stuff like that.

I really only knew Clive and his company through his friendship with this guy Tim Idelwatt, who ran Cambridge Consultants, and as someone who was running a business locally. To tell the truth, at Cambridge Consultants where most of the employees were graduates of Cambridge University and a lot of them had advanced degrees, and we tended to look down our noses a little bit at Sinclair Radionics. The technical people at Sinclair weren’t as well educated and as well qualified as we were.

I guess if there was any perception of what Sinclair was all about was that it was a crass commercial organization compared to the almost ivory tower stuff that we used to do at Cambridge Consultants.

Tim: (chuckling) But it was a job…a paying job. (more seriously) It seems like Sir Clive had a talent for bringing into his company key people with bright ideas. Is this a quality that you noticed?

Nigel: Well, Clive had never been to college. That was a conscious choice that he made. I think he was very sympathetic toward the idea that formal education doesn’t necessarily have much to do with ability. And so he tended to look for different qualities in people other than formal educational qualifications. And so, yeah there were a lot of people who were pretty bright, creative sort of people. People who may not have been too happy in a more conventional organization. A lot of people like that played a big part in Sinclair’s success over the next few years. And interestingly, a lot of them, when they eventually left Sinclair, did so to go and start their own businesses. And I think that’s a credit to the company. I think Clive always felt that if somebody left the company to go and work for someone else, that was their problem and that they probably hadn’t ever really been good enough to work for him anyway. But if they left to go and start their own company he was extremely supportive, however sorry he may have been to loose them, and he frequently used them if the company they had started did any sort of consultant work.

Tim: Let’s advance history a little bit with the ZX80 and ZX81. As far as the Sinclair following over here, a lot of people consider Sinclair BASIC and the single keystroke command function as superior engineering features. How much influence did Sir Clive have over that design, or did he bring in someone with that idea?

Nigel: I really don’t know. When I first saw the ZX80 in January of 1980, shortly before it was launched, Clive showed it to me to explain to me what his new company (SINCLAIR RESEARCH LTD.) was going to be doing. Those features were already designed into the ZX80. My guess is that the keyboard stuff probably came from Clive. In 1975 I had worked on the design of a programmable scientific calculator which for reasons of economy and compactness, Clive had wanted to put into the same case, a very small calculator which had been designed originally as a four-function calculator. So we had 19 keys to play with, so each key had to serve at least two and usually three separate functions.

Tim: I had heard that because of the membrane keyboard, that people weren’t going to do a lot of typing on it. And that was possibly one of the design considerations for using a command-key arrangement.

Nigel: That’s possible. But I’d be surprised if there wasn’t a connection between that keyboard and the way we crammed a great deal onto keyboards previously. And in fact, from a programming point of view, with the designer’s, it’s probably easier to recognize first of all that a shift key has been pressed and recognize that keys have been pressed after that, and that it is a whole command rather than to recognize a sequence of individual characters. The syntax checking–I don’t know where that came from, but in retrospect its the sort of thing that would fall out if you encouraged whoever was doing the programming to look at the way that calculators had worked. I mean basically, if you enter an illegal character sequence into a calculator, whatever that may be–two decimal points following one another, it will recognize it immediately. Its a clever idea. It was a feature that was much appreciated in the machine. My guess is that it sort of just dropped out of the design criteria.

Tim: Here in the U.S., our major contact with Sinclair was through Timex and their mass marketing. Timex brought out the TS1000, and then the TS2068 for a short time, which was based on the Spectrum design. I had heard that Sir Clive made a comment that Timex had “fouled up” his Spectrum, in a well published statement. Did he actually believe that Timex had messed up the Spectrum design?

Nigel: Well we had high hopes for the American market. By the middle of 1982, Sinclair was actually deriving more of its revenue, more of its sales and profit, from the U.S. than the rest of the world put together. Even though in the States we’d been selling the ZX80 while the rest of the world had the ZX81, we’d been selling the ZX81 for a few months while the rest of the world had the Spectrum. So we had very high hopes for the American market, but they clearly depended upon going retail. We felt that our name was unknown to the major retailers in the States. We had no sales force. We had no experience in managing/motivating a sales force in the States. And so we decided we needed to find a partner who knew that. And Timex clearly knew and understood the product. They had been manufacturing the ZX81 for us as a sub-contractor, and they had a lot of sales people calling on every conceivable type of account selling watches and everthing else. In some respects I think that we looked at Timex and said “well, at least thank God that they were there, and we weren’t”, because frankly, we would have lost our shirts in ’83 with whatever our strategy would have been in the States. The market was out of control of any individual manufacturer, and it was marketing in

which everyone was guranteed to loose money no matter how intelligently they handled themselves. So Timex took the brunt of that. I think that Timex might well look back at the situation and say to themselves “boy, I wonder if Sinclair really knew enough about the business to anticipate what was going to happen and lured us into taking the brunt of it”. You know, if I was in their shoes, I might think that. But I think that at times, Clive would agree, and I believe he made comments to this affect (regarding the Timex TS2068), and he had a considerable sympathy for Timex that they got into a business which looked as though it would be very very profitable for both of us, and turned out to be otherwise. Having said that, there were certainly times when both Clive and I thought, and anybody else who was involved thought that Timex was not helping itself as much as it might have done. I think for example, Timex was right to hire some senior management to run its computer business. You didn’t want the business to be run by a guy who’s primary concern was designing, making, and selling watches, because the computer business would seem to him to be a relatively small business initially and perhaps wouldn’t get enough attention. You needed to have people in Timex who didn’t have anything to do with watches, who’s lives depended on the computers being successul. But what they did was to build up an entirely separate organization, and they didn’t make use of all the expertise they got out in the field of selling. The reason was, “well the guy who is a watch buyer isn’t the computer buyer”. I always felt there must of been some way that they could use their leverage as a major supplier of watches to department stores and drug stores as a way of opening the doors and having the right influence in getting the product out. And maybe they did to some extent, because they were pretty effective in getting the product out. But, yeah I think they did a lot of things that–I mean they spent a lot of time screwing around with the Spectrum and redesigning it, and by the time they had done it, I think that they had got a machine which was better than the Spectrum in many respects, but it was a lot later. So whether the 2068, when they got it was better than the Spectrum would have been, when they could have had the Spectrum, was certainly debatable.

I remember Clive’s reaction to the TS2068, was that he thought it was a pretty neat design. So much so, that–the QL was at a stage of development where we were beginning to think about exactly what it should look like. The guy who was given the job of designing the appearance of the QL was given a 2068 with instructions to take a close look at it and see what could be learned from it. And I think the QL owes something to its design, to the 2068. That was something that Clive, as I recall, encouraged.

Tim: There was some talk about an expanded TS2068 with more memory, bank-switching, and some sort of higher operating system. There was also a rumor that Sinclair engineers were working on an advanced Spectrum with technology which would be shared with the Timex organization. Were you aware of any such project?

Nigel: To the best of my recollection there wasn’t. There weren’t projects within Sinclair to develop the Spectrum further. It was a constant topic of conversation after the QL design was well under way, as to whether we should attempt to replace the Spectrum with anything. We eventually approached the problem by saying “what is the worst thing any competitor would do that would hurt our sales of Spectrum computers?” And we decided that the greatest weakness of the Spectrum was the keyboard. And I think this must have been 1984, because I think the QL was already lauched, was already in production. So what we decided to do very simply was to design a new case for the Spectrum. That became the Spectrum Plus. And all we were doing was designing a new case so that production would literally switch over as soon as the case became available, and the same printed circuit board and everything else would go into the case. That turned out to be a very key move in maintaining our market position and maintaining our margins, because we were able to charge more for the Spectrum Plus, or at least we were able to go on charging what we’d been charging for the Spectrum. Otherwise we would probably would have had to lower the price.

And so I remember that decision being made very late in the year; a big rush to get that out before the end of the year. We’d been pretty much immobilized. Nobody could decide exactly what to do about the Spectrum, althought there were lots of ideas around. But it was much later, probably in 1985 before any work really got underway on the 128K Spectrum and products like that.

Tim: At a recent Timex Sinclair user group meeting in New York, Billy Skyrme, who was the former head of Research and Development at Timex, now with Psion, described a computer called the TS3068 which was slated for production. Was this pretty much an “in-house” Timex design?

Nigel: Yeah, I’m pretty sure it would be.

Tim: Someone just suggested that Sinclair engineers were working on the design with Timex, but to your knowledge, that wasn’t the case?

Nigel: We did have one engineer within Sinclair who was appointed specifically as a liason with Timex. Timex may have asked his advice about things, and he may have played around with and looked at the feasability of some things like that. But it certainly wasn’t something that we were working on.

Tim: Incidently, Timex is still fairly committed to secrecy over a lot of things that they were working on. At the same user group meeting, Billy Skyrme mentioned that he could only tell (the group members) about a few things, but that a lot of information couldn’t be divulged because of contractual agreements.

Nigel: Hmmm. Well Timex did have some surprising projects going on. (a bit of silence) I mean I probably shouldn’t mention some of the things for the same reason, because I don’t know what they are doing with them today, but let’s say that one of the attractions of Sinclair and Timex, was that Clive’s always been interested in “miniaturization”. He’s launched at least a couple of wrist-based products. A wrist calculator that’s not a watch, a digital watch, he had a watch radio. So at least three products now, I think, that were worn on the wrist. And Timex, and so far as it is a watch company, and certainly understands that people may want things on their wrist that do more than just tell the time. Timex has already produced calculator watches, and they have a watch that has a lot of timing functions and so on, which has been the best-selling single model of a watch for a couple of years in succession.

So both Clive and Timex have somewhere down the road in their minds, a sort of “Dick Tracy” type thing with a television, and a telephone, and everything else built into it, that you still wear on your wrist.

Tim: This is still something that they (Timex and Sinclair) are working on, not just a conception, but an actual product?

Nigel: I mean it’s…you know, if I fell asleep now and woke up in ten year’s time, I wouldn’t be surprised to find either the Sinclair or the Timex name on a product like that. And I guess despite the past history that Timex and Sinclair’s relationship

has not been a mutually profitable one, I guess that I wouldn’t be totally amazed if I’d woke up in ten year’s time and found that the product had both their names on it.

Tim: Is Timex still producing computers with Sinclair technology at this time, or have they scrapped all of that?

Nigel: Timex? As far as I know, Timex is not doing any computer work at all. As far as I know. But I guess I wouldn’t know if they were.

Tim: Do they still have the rights to Sinclair technology, or has the sale to Amstrad taken that away?

Nigel: I’m pretty sure that the licensing agreement between Sinclair and Timex has expired by virtue of Timex’s not offering any products for sale for a certain period of time, the agreement would just terminate itself under those circumstances. So I think that when Clive sold the rights to Amstrad to the personal computer stock, that would have included the rights which had formally belonged to Timex.

Tim: Let’s turn to the QL. You had a lot more “hands on” with the QL project, than perhaps the ZX81 and Spectrum. What was your role in the development of the QL?

Nigel: Mostly sort of conceptual. Originally the QL was designed to have a built-in screen utilizing Sinclair’s flat cathode-ray tube technology. And it was originally conceived to have a built-in modem. Some of the things that I remember about it…you know, obviously the flat screen got dropped simply because that technology was not going to be manufacturable in the time scale. The decision to use the 68000 chip was made pretty early on. And although we sort of wavered over that a number of times, the situation as I recall it is, that basically the engineers who were going to work on the design of the machine, both from a hardware and a software point of view, would have had extremely little enthusiasm for using anything other than the 68000. They saw the 68000 as being the state of the art microprocessor. And I suspect that we may have lost some of those people to other companies, while they would have had the opportunity to work with the 68000. And I think that everyone would have agreed that it didn’t necessarily enable you to do anything that you couldn’t have done with others, particularly because we were using such a minimal version of the 68000, the 68008. But in the long term, it gave us an upgrade path as well. Had the QL been more successful you might be seeing a QL today with a 68020 or even a 68030 in it.

The software that Psion designed for the machine was pretty radical at the time, and that was something that I was involved in, certainly the idea of having that software built in. It was something that I instigated with David Potter of Psion.

I had been shown, in confidence, an early version of GEM from Digital Research, and it was one of those situations, where it confirmed something that I’d already been thinking. I’d had this idea which to me at the time was an original idea, but I probably, you know, read it when I was half asleep sometime–stole it from somebody else. But when I saw GEM, I knew that it was right. The idea was a really radical one at the time, and it was the idea that you should have a spreadsheet which from a user interface point of view, looked just like a word-processor or the database. In other words, all the time that you spent learning to use the spreadsheet, shouldn’t be wasted when you wanted to use the database program. You should see similar things on the screen. The F1 key should do the same thing, the F2 key, everything should be, the whole user interface should be as mapped as closely as possible. And that was, in my mind, the most significant thing we were doing with the software from Psion, was not simply that we were offering a set of programs like that, but that they all worked in a similar way.

Tim: I have to ask you this. There was an interview with Sir Clive a while back, and the statement was made by Clive that he wanted to use the Z80 processor in the QL, and that it was your persuasion that changed his mind to use the 32-bit processor, and now (looking back), he wished that he had “stuck to his guns”, rather than listening to you. How do you feel about that statement?

Nigel: Well, Clive’s had a love affair with the Z80 for a long time, as evidenced by the Z88 computer. He’s very impressed with the fact, that for a mere dollar or so, you can buy this incredibly powerful microprocessor, which the Z80 certainly is. He also, at one time, had a love affair with the 68000. And he and I visited Motorola, I believe in January of 1982 in Phoenix. And we had some very high-level meetings with people in Motorola. And Clive was very much convinced at that time, that the 68000 would be the way of the future, and was very taken with the idea, that he and his company would be leaders in using the 68000. That’s not to say that he didn’t subsequently decide that the Z80 after all was much better. I think that maybe he got married to the Z80, and had an affair with the 68000, and then he went back to his “wife”.

And certainly, as far as the QL was concerned, I don’t think it was my idea originally to use the 68000, but I think that we did go back and forward, and we considered using other processors including the Z80. When ultimately the decision was made, Clive is probably right, he probably said to me eventually, “look, your running the company, your working with the guys who are going to work on this project, you decide”. And it’s possible in that sense, that he chose to let me decide, or he listened to my arguments, and was even persuaded by them, or thought that he ought to not be making every decision in the company on things like that. I have no doubt whatsoever though that both from the point of view that had the QL been successful, it would have given us an upgrade path, and from the point of view of

motivating people to work on the project. I do not believe we could have gotten really good people working on a Z80 project.

I have talked to Clive about it more recently, and I certainly expressed my view to him that the “Achilles’ Heel” of the QL was the Microdrives. Maybe he just chooses not to argue with me about it any longer (laughs). But obviously as I say, he still has a pretty strong feelings about it. I’m sure that the use of the Z80 in the Z88 is not some sort of accident, it’s there by design.

Tim: In another interview, more recently than the one I just mentioned, that he (Sir Clive) feels that since disk drives are mechanical, and that all mechanical things will eventually be replaced by solid state. I personally don’t see this occuring for some time, of phasing out disk drives, hard drives, drives of any type. Why is it that he has always been “anti-disk drive”?

Nigel: (pause) I don’t know. I think it is a (another pause)…I don’t think that he is just anti-disk drive because it’s a mechanical device. The Microdrives are a mechanical device as well. A disk drive is always going to make a machine more expensive, because of the mechanism that’s gotta be built in there. It’s gonna have some speed problems because there isn’t equally instantanious access to all parts of the drive. Disk drives are going to have the advantage of the media being very, very cheap. But ultimately, I guess there is no reason why solid state can’t be very cheap too. And Clive is, in many respects, more of a semi-conductor person than a computer person. One of the reasons that he’s been able to design some of the products he has at very low cost, is that he’s been able to take advantage of what the semi-conductor industry’s producing and sometimes use it for purposes that it never intended. And he has a very good, very deep understanding of what’s going on in the semi-conductor industry. And I think he believes that one of these days, in sufficient volume, the semi-conductor industry will be able to churn out a 10 Megabyte chip cheaper than a, or very close to, as cheaply as you can produce a 10 Megabyte disk.

Tim: Jumping to the Z88 portable computer–I remember about a year ago speaking with you on the phone about your impressions of the Z88. At that time, you felt that the machine was “a little late” in retrospect of the portable computer market. And then here, many months later, I find out that you are a key figure in marketing the machine here in the U.S. Why did you jump on the Z88 “band wagon”? Did Clive give you an offer that you couldn’t refuse?

Nigel: No (pause) I think that the Z88, and I want to be careful about what I say, because I have some knowledge of the company’s future plans and I don’t want to give them away in any sense.

Sinclair Research as a personal computer company eventually became a company that did over 100 million pounds of business in a year. Then the exchange rate was over 150 million dollars a year. It certainly couldn’t have done that without the ZX80. The ZX80 was a successful product given what it was. But we sold a few tens of thousands of them world-wide, and it took us over a year to do that. Later on we sold twice as many Spectrums in a single month as we’d ever sold ZX80’s in a whole year. So the ZX80 was a “launching pad”. And I guess my feelings about the Z88 are somewhat similar. I think it will find a market. I think it will be successful. But it will be a limited market. We’re not going to sell millions of Z88’s. I think that if the company remains committed to the portable market, and looks at what it can do in the form of a Z89, and the Z90, and the Z91. And makes the same sort of progress that it made in going to the ZX80, to the ZX81, and to the Spectrum, and to the QL, then I think we can sell millions of portable computers. So, if I’d thought the Z88 was the end of the design line for portable computers, I’d say its got a limited life–its going to be overtaken by other manufacturers products sometime in the next 24 months. But as long as it’s the company’s intention to itself overtake the Z88 and these competitors with one or more new products, then there’s a real future there.

Tim: So Clive is working on other laptops?

Nigel: (smiling) I hope so.

Tim: OK.

Nigel: I hope so, because I mean not because I think the Z88 is the only portable computer thats really small enough to carry around with you wherever you go at the moment, and it will remain that way for maybe another year, with luck maybe a little longer. But ultimately somebody’s going to bring out a product that will obsolete the Z88, and the objective in this business is to make sure that you obsolete your own product before somebody else does it. So I see the Z88 as very akin to the ZX80. It’s a terrific first product in the category, but I think that category is going to be very competitive fairly quickly, and we’d better be doing something–a major step forward, to remain competitive.

Tim: That’s sort of ironic, because the ZX80 was a $200 computer, and the ZX81 was a $100 computer, but with the Z88 you have a $500 computer that people are sinking a good deal of money on, and then you release another product–the Z89 for such and such a price. That’s going to be a little harder for people to swallow when the new product comes out.

Nigel: That’s always been a tough problem in the computer business, and I just don’t know what the answer is. I mean, would we make everybody happier if we don’t bring out any new products? Or if we bring them out and charge twice as much for them? I don’t see any alternative. The products that are possible and the prices that are possible, are dictated by the underlining technology. And that is available in more or less equal measures to everybody, including ones competitors. If we can bring out a ZX81 that was less expensive than the ZX80, there’s a good chance that somebody else would have done it. In fact, Commodore announced a couple of machines in that sort of price range at a Consumer Electronics show one year, then didn’t bring them out. Probably because they wouldn’t have been competitive with the ZX81. I think that you’ve got to decide when you buy a product whether its worth what your paying for it now. I mean people payed $2000 for the first VCR. I payed $999 for one of the first TRS-80 computers from Radio Shack with 4K memory and an integer-only BASIC.

Tim: How soon do you think another computer product will be released, given a frame of time?

Nigel: I’m not prepared to say…I really can’t say.

Tim: I have just a couple more questions. Is there another computer product, not related to portables, coming out, or is the portable-thing consuming all of Clive’s time right now?

Nigel: Clive has had an interest for a long time in computer design. And I don’t know much about this. But I believe he is still working on, with a long term objective of producing what we would call today, a “super computer”, with some degree of parallel processing, large amounts of memory, and probably a custom processor.

Tim: A “mini-Cray”?

Nigel: A “mini-Cray”. Yeah.

Tim: My final question is, overall, working with Clive Sinclair and looking to the future, is it exciting? I mean it must be a lot more interesting than your average “paper-shuffling” job?

Nigel: Oh yeah, it’s certainly exciting. I suppose the excitement comes from knowing that at any moment almost you could be part of truly explosive growth.

We started Sinclair Research in the States to sell the ZX80, and we sold, I forget how many ZX80’s altogether, but over a period of a little more than a year, we sold quite a few. Twenty thousand maybe. And in the fall of 1981 we started selling the ZX81, and by the end of the year, we were doing over half a million dollars worth of business a week. And we literally went from virtually zero. The ZX80’s had stopped selling because the ZX81 had been launched in England, and we got the ZX81 available in the States eventually approved by the FCC and everything. And we just overnite went from a small office employing two people with hardly enough to keep us busy all day, to where we were receiving several hundred orders a day. Running at an annual rate of 25 to 30 million dollars. And yeah (laughs), that’s pretty exciting.