From the Chairman’s Disk

Author(s): Donald Lambert
Publication: ZXir QLive Alive!
Pub Details: ZXir QLive Alive! v8 n2 (Volume 8, Issue 2)
Date: Summer 1998
Pages: 11-12

When I had my annual physical in December Dr. Paine suggested get my appendix scar operated on since it was herniating. So that was a medical problem to get taken care of before it fully herniated and entrapped the bowels. I put that on hold for a while. Then when I went in for an eye exam February 25th which I felt was needed to get new lenses I was told that both eyes were in need of cataract surgery. The left eye for the first time and the right eye that had been operated on in 1994 a laser burn off of the membrane back of the implanted lens and that would fix that eye for the future since it would never get cloudy again.

So I ended up with an eye appointment with Dr. Parent who is the eye surgeon that I had went to before. And the appointment was for April 8th to exam the left eye for first time surgery and for the right eye to be treated (blasting the membrane off in tiny blasts). March 8th I went to Indianapolis to the HamFest and talked to Frank Davis about his experiences with his herniated appendix scar. No way I wanted to go through that. I decided that the worst of the winter was over. I saw the Surgeons Dr. Paul, and on March 16th I was operated on and spent two days in the hospital and then loafed around home (no driving the cars no lifting of more than 5 lbs.) until April 30th when I was told I could do anything I wanted to. On April 8th Masako, my wife, drive me to Dr. Parent’s clinic and we spent most of an afternoon there and I got the laser treatment. That evening at 10 the effects of all the eye drops used (2illions of them as the kids would say) wore off and my vision return to the right eye. How did I know that it had worked? I could read the fine print in my paperback dictionary without a magnifying glass! What is next? June 11th when I go back to Dr. Parent’s clinic to get my left eye worked on.

I will admit that I did not get much computing done during my recovery. For the first part I did a lot of napping. Seems like I was worn out from just getting up and eating breakfast and shaving and washing up. And then later it seem like all I wanted to do with the computer required lifting in excess of five pounds. And the weather was so gloomy that I didn’t have much ambition. And my five foots ninety five pound wife had to mow the yard three time5 before I was able to take over. I am sure glad I bought a self propelled lawn mower last fall.

The hardest thing to do is to ride with the wife driving and not back-seat drive. Her driving habits are not mine. But we got there and no accidents 50 I guess all is O.K.

Way back when! last year sometimes I saw an article in NUTS & VOLTS about making a BATTERY Gas GAUGE. Well, a later update gave a company that offered a printed circuit board for that and my letter to them was printed in the current (May 1998) issue to modify the 12 volt monitoring to a 6 volt (or the math to figure for any volt) battery. I had ordered a pair of boards when I saw that they were available and I ordered the LM3914 chip which came last week. So now as the garage gets warmer have to get that going for using S RAYOVAC RENEWABLE Alkaline batteries to be standby for the Z88.

I also ordered a 110 VAC to 220 VAC wallwart to use on the Z88 EPROM ERASER. I needed to have enough items to make the order over $20.00 to avoid the extra $5.00 charge for a small order. I ordered from JAMECO. For those interested the transformer is #99457 50’vN 110V4C to 220VAC weight 0.7 pounds *5.95. JAMECO 1-800-831-4242 and ask for a catalog.

After all the excitement and planning I believe that RMG has all the T/S stuff moved to where it can be accessed and shipped to any that want it. But like I always have maintained there are so many that are using the Timex Sinclair computers that don’t know of all the sources there are. If we had known of Jack Boatwright before this all would have been taken care of much easier and cheaper. But at least it got down.

I did get the lists of the CATS cassette library made from the information in the newsletters. I have found that some of the programs would not LO4D and SAVE BUT! in some cases learned that some of the programs were Spectrum programs. find one program will not LIST even if you can get it to break. But on that I did get further information so I will have to get back to that. Ns John Riley wrote, he learned a lot from converting cassette ACw DCISY- but | mi sd sinCQ the pure AERCO does not have a NMI SAVE button.

I was SAVEing to Oliger SAFE and one thing it has in the directory is the byte length of the program SAVEd. So that is handy when you see from the header reader that the program is, for instance, 4751 bytes long and the Cat after SAVEing to disk shows 1395 you know that the entire program did not get SAVEd. I also learned that using MERGE “” to LOAD a program often would break a program that I could not BREAK any other way. Of course that i5 old hat to a lot of you.

I use MSCRIPT for my word processor and I wanted to number the pages. So read the MSCRIPT manual and it gives it as >PN=xx where the xx is the 5tarting number of the page. But it didn’t work however I saw an example in the manual:

>LM=B, LL=50, PS=4, PL=43, PN=1
>BT=article name//Page $

That did work. For those of you that don’t use MSCRIPT this i5 the header and none of this appears in the text and deciphered it i5 Left Margin 8, Line Length 50, Page Space 4, Page length 43, Page number 1. Bottom of text article names and the slashes the article name and the article name would be centered and both slashes before the article name would print the article name on the far right. Now the Page $ is the one that gets the page number to print. I suppose the $ is for the string of the page number. If you had wanted the article name at the top along with the page number you would have used TT instead of BT. TT is Top of Text in my mind.

Of course it takes a little waste paper to learn the proper PS which is the number of lines between paper. Thought I had it set and it ran off several pages and suddenly it started to put text on the following page and then the article name and Page number. What had happened was that the preceding pages had a blank line at the bottom of each page so when the line on the bottom line had text was the PS forced to the next page. I cured that by decreasing the PL by one. How many years have I been using MSCRIPT and didn’t know how to use Page numbering? Must be about 13 or 14.

Now that I am capable of doing thin95 I have been informed that get done. So that is what will be what I will be doing the next few weeks. With TSing being what I get to do between times if there is any energy left for that. I do find that I tire more easily 50 maybe I am not 100% over the operation. Till next time this is it.