Welcome to Sinc Link from your new newsletter editor. I hope to keep you informed and entertained with facts and fiction from Sinclair and now Cambridge computers. Since this is a Sinclair club we should follow our knight and the his computers wherever they come from. His latest, named the Z88 what else, is a re-thunk of the Tandy model 100. It’s sold in US by Sharp’s for $399(us). I’m very tempted by everything I read about it to spring the Visa for one.
I need articles to print! Come on now, everyone can send something that they want to share with the group. Anything – ransom notes for kidnapped Spectrums, uses for ZX80’s other than foot warmers, I know you use them for something.
Disk Droppings
In my last column I went on at great length about my new QL. Now I’ll look at the Psion Stringy Floppy Quartet. Porcupine Quill, Abacurse, Sour cream and Archives, and Easel rider are the members of the quartet. To the un-QL’d among you these are the Word Processor, Spreadsheet, Database and Business Graphics progs that come bundled with the machine. I’ll look at Quill as I have had the most indecent exposure to it.
Quill is as slow and steady as the rodent barb it is named after. For my uses, it has all the features that a home word worker needs to do the job. I have had some experience with other WP programs and find that speed isn’t everything. Help on demand and friendly prompting for every command are the key points Quill has in it’s favour. I read the manual once and have found that the Help files are enough to guide me through any mess I get into. Although I don’t have it, a memory expansion board will allow the creation of really big (100 page or more) documents. The limit is storage medium here obviously. A disk or microdrive scratchpad is used, the mysterious def_tmp file, to shuttle words in and out of the ram used to hold your document. If your doc is bigger than your memory capacity that’s where the prog puts it temporarily till you save the file. In an experiment, I made a document that was 42 pages (134112 bytes) long before my system – 128K QL & Cumana interface with 2-360k discs – gave me a not enough memory error. At this point, I was given a warning, which I ignored (hey, it’s a warning not a lockup!) and the program then prompted me to abandon Quill and face the wrath of Superbasic. I was dumped to Superbasic, a place I like to avoid at all costs, no more menus or help files. A check of my disk showed a file def_tmp recently created and 135823 bytes long. Being a brave soul, I renamed the file test_doc and restarted Quill. I then loaded test_doc, alias def_tmp and got most of my 42 page document back. I saved it and now can testify that without extra memory 42 pages is the place to stop. Brian Taylor a QL’er with disk and 640K said he stopped the fun at over 100 pages with no warnings in sight. Incidentally, I am using version 2.1 other versions may act differently. A word of advice here save early and save often. There’s no substitute for backups.
I like the possibilities available with extra memory. One of them is a Ram-disk. I recently got QfLash, a ram disk and toolkit utility on micro-drive cartridge ($ 26 US.) from Sharps. Great stuff! If you have this program and some extra memory you can speed the QL to rival Sir Clive’s Black Turbo Porche 911 (that’s the one I paid for by buying a ZX-81). The ram-disk is a partitioned area of memory, that to QDOS is a storage device, to you it’s fast loading and saving. It can allow you to load screen file from ram1_ in 0.088 of a second (QfLash times). Try that with a floppy or micro-drive. It’s too bad Uncle Clive never gave us the 512K wafer drive.
In actual use you would load your ram disk software on st[illegible] up. Next you would copy the files you want into the ram disk. Now fasten your seat belt and wait no longer for loading and saving. When you are all done, you can SBACKUP (selective backup) all the files on the ram-disk that you have changed.
To use Quill with a ram-disk you run the CONFIG_BAS program and set your Help and Data files to RAM1_ and change your Quill load program.
Here’s a sample of my Quill loader:
1 CLS:INPUT "Date and Time (mmddhhmm) ";z$
2 IF z$="" THEN GOTO 4
3 SDATE 1987,z$(1 TO 2),z$(3 TO 4),z$(5 TO 6),z$(7 TO 8),0
4 PRINT DATE$
5 INPUT "ok ? (y/n)";z$: IF z$=="n" THEN RUN
6 COPY FLP1_QLWP_HOB TO RAM1_QLWP_HOB
7 REMark put help on ram-disk
8 CLEAR
9 CLOSE #1:CLOSE #2:WINDOW #0,400,20,35,215
10 EXEC_W FLP1_QLWP
11 SBACKUP RAM1_ TO FLP2_
12 OPEN #1,SCR:OPEN #2,SCR
Lines 1 to 5 set the date on the QL.
Line 6 copies help to ram1_.
Line 9 and 10 setup and load Quill.
Line 11 copies the files created to flp2_
Line 12 leaves you in a normal state when you exit Quill to Superbasic.
I must add here that I have ordered a ram expansion from Matthew Zenkar of Rochester NY. He is producing the MZ512K expansion for the QL. It features no-wait state ram design and a full thru port for complete periferal compatibility. There is a low chip count and little power drain. In his words “I think I have done what I set out to do with the MZ512K; that is, design the best available board with the best technology for the lowest retail price.” Watch for a review here soon of the first production unit available. Matthew has sent a proto to QL World for a full review. To order see the November Computer Shopper Sinclair QL classified adds or write to Matthew Zenkar at PO Box 12534 Rochester NY 14612-0534. Go ahead, make his day, expand your memory. 128287
SINC-BITS & THE QL WAYFARER WILL RETURN NEXT ISSUE !
Media
Note: Type-in program listings on this website use ZMAKEBAS notation for graphics characters.