Letters to the Editor

Author(s): Vince Dela Garza; Warren Fricke; Charlie Day; Frederick Zlotkin; G. Maake
Publication: Synchro-Sette
Pub Details: Synchro-Sette v2 n6 (Volume 2, Issue 6)
Date: June/July 1983
Letters To The Editor heading with cartoon of a man at a computer holding a "Dear Ed" letter
Letters To The Editor heading with cartoon of a man at a computer holding a "Dear Ed" letter

Dear Ed,

I think your “BABY-SYNTEXT” program is delightful and I would have ordered “SYNTEXT” except that my Memotech keyboard doesn’t seem to work well with the program.

The keys do not appear to contact each time you press them. For example, you have to press the “A” key 3 or 4 times before it appears on the screen. Keywords work better. Can you suggest a solution?

V. Dela Garza – Ft. Washington, MD

Dear Vince,

That doesn’t sound right at all. Possibly the keyboard contacts are not making proper contact. I will be talking to Memotech in the near future and I’ll relay your message and name and address to them.

They do offer their own word-processor in cartridge form for $49.95. It is not only much faster than “SYNTEXT” but has more features, more text memory and comes up running when you turn on the computer. Possibly it would be more suited to their keyboard, which I heard is a beautiful device – Ed.


Dear Ed,

There is a risk in using an address like 30000 for the start of an M/C routine (Computer Tutor 5/83 -Ed.) without protecting it with a lowered RAMtop. This omission is probably why the program didn’t run for you on the ZX-81.

You were lucky it did on the 1000. I used the first line after REM and the program worked OK on both of my computers. I did not try using 30000 and a lowered RAMtop, but I have a feelng that this would work OK too.

Very truly yours, | Warren Fricke – Depew, NY

Dear Warren,

Good to hear from you again (Warren is one of our regular contributers – see “NEEDLE” in the March/83 issue).

I agree that not setting RAMtop can be dangerous but the only time I’ve encountered problems is when the procedure of setting the RAMtop, entering the M/C routine, typing in “NEW” and then writing in the program and executing it, is used.

This procedure is cumbersome and very confusing – plus it is next to impossible to save many of these operations, in their entirety, on tape.

Take a gander at the “GRAN MARQUEE” program on this month’s cassette. I think the professor came up with a real beauty this time. No setting RAMtop, yet it has worked on every computer I have tried it on, except with the old BB RAMpack (see next letter).

If the program itself allows RAM space for a properly written routine to fit in and the program can POKE it into that space, I can see no reason for setting RAMtop.

I’m probably wrong and I would like to hear your views or anyone elses on the subject.


Dear Ed,

I very much enjoy your magazine – especially the tutorials.

My adventurous nature led me to try the reverse scroll routine in the MAY/83 issue, even though you couldn’t get it to work on a ZX-81. I found it worked perfectly.

I did make one change, however, and maybe it was the difference. I took the hex code of the scroll routine and converted it to decimal myself. I then poked the code into a REM statement, my preffered location for M/C routines (first line – 16514 – Ed.).

The address 16514 was substituted for “x” in line 240 and the 9000 section left off. Perhaps other readers can try this solution.

Please continue to include machine code articles in your magazine. They are welcomed by myself and I hope many others.

Thanks, | G. Maake – Whittier, CA

P.S. Naturally, this letter was typed with “BABY SYNTEXT”.

Dear G.M.,

Good ol’ “BABY SYNTEXT”. Since making that statement about the ZX-81 possibly being responsible for the M/C crash, the Old Professor discovered it wasn’t the computer at all. The 16K RAMpack was one of the earlier models from Byte-Back and he believes that some of the RAM addresses in the pack are not addressable, therefore causing the M/C routine to be inoperative. When a different RAMpack was attached to the computer, the routine worked fine.

I’m glad you liked the tutorial and I hope you like the Professor’s offering this month – Ed.


Dear Ed,

I began to receive your magazine in February 1983 and I have been very pleased with it. I have read it from cover to cover at least 5 times. I really do enjoy it.

I would like to buy a TS-2000 when it comes out and sell my TS-1000. The problem is that I have a small fortune tied up in software and was wondering if any (a lot is in machine code) would be compatible with the 2000.

Sincerely, | Charlie Day – Gastonia NC

Dear Charlie,

I’m not sure. When the SPECTRUM (European version of the 2000 made by Sinclair) was first introduced, I was assured that the lower 8K of the ROM was identical to the ZX/TS ROM. Supposedly, the user could enter any program written for the ZX/TS into the 2000 and it would run OK.

The 2000, of course, has many more commands that can be added to the program to enhance its effectiveness. A program on tape for the ZX/TS could not be loaded into the 2000 because it operates at a baud rate 5 times as fast. Theorists speculated that if you could speed up the recorder to where the motor speed was 5 times as fast, the program would load OK. Other theories held that possibly some of the “quick-save” routines which save and load programs on the ZX/TS 5 or 6 times as fast could be used. I have not had any input as of yet from any SPECTRUM owners as to whether this could be done.

Machine code is a different story, however. Routines that would normally reside in RAM area may now find this space dedicated to the new ROM. I’m not saying it isn’t possible. The routine we had in the May/83 tutorial can be put in a RAM location desinated by the BASIC program format.

Selling you 1000 may also be a problem, particularly if you paid over 50 bucks for it and expect to get that money back. Another possible use would be to get the TREE FORTH circuit board for it and have yourself an entirely different computer that would give you computing power with a different scale.

It is not a language as easy to learn as BASIC but you’ll be entering a whole new world of real-world computing. See this month’s article, “The Forth Corner”.

Since you like machine language, you sound like a gent who could really get his teeth into FORTH – Ed.


Dear Ed,

Your program for Mr. Baney that totals and averages inputs (April, 83, p. 26) is OK except it keeps the total a secret! Rewriting line #80 should help:

80 PRINT B;TAB 4;A(B);TAB 13;C
;TAB 23;C/B

Amazing how useful such a simple program can be for something like accounting – to be used, only after all the game-playing is complete, of course.

Sincerely, | Dr. Frederick Zlotkin – NY, NY

I concur – Ed.