The Newport Miracle which was sponsored by IQLR is now part of QL history.
On Friday June 4th, at the Carlton Motel in Newport, we had a busy time meeting and getting to know each other and general gabbing. Many visitors from all over the country were staying there, with some at other motels nearby. Central point being the Carlton.
The UK contingent consisting of Stuart Honeyball, Tony Firshman, and Bill Richardson were all busy on this day just talking about things in general, and there was a fair amount of swapping of wares and information.
I was able to meet many members of our club, and to discuss our club with them. I was also able at this time to show them a program I have just completed called QUANDEX, which is an index/cross reference type of thing for the QUANTA Magazine from the time it first started. This program is being sent to QUANTA for inclusion in their library. (I hope) It already is in our own QL Library.
On Saturday, I had a table on behalf of our club at the Salvation Army Building where the convention was held, and again meeting many of our members, and also many who were not members. I met many who had heard of us, and many who had not heard of us. Now I can say that many more know who we are, where we are, and what we are at.
I had my trusty QL with me, and all the stuff that goes with it, and also a few demo programs to keep interest alive in my little corner of the area. But shortly into the demo my trusty QL decided it was a bit shy and embarrassed in that hoard of milling bodies, and decided that it did not like the “1” key. So I replaced the membrane hoping that my troubles were solved, but my trusty QL was still not up to appearing in the public eye, and decided the only way to get seclusion was to stop accepting power at the power input socket. Woe is me, a lot of demo stuff to run, and a table loaded with literature, and my trusty QL goes all bashful on me.
However all was not lost. I was able to borrow from Bill Cable a spare unit to help me out, but I was not out of the woods yet!
When I started to install my Gold Card in Bill’s machine I bent the pins in the port. But I was fortunate that I had a pair of long nosed do-dads and was able to get deep into the port and straighten out the pins.
I was back in business, many thanks to Bill Cable, and the demos were running again.
Those demos were mainly run using a program called Vision Mixer, utilising many of my EYE-Q pictures, plus some I had made with PictureMaster. I tried to make the demos interesting as well as amusing.
Vision Mixer is a program that allows you to change screens in a nice easy automatic manner, and the screens are changed in many different ways, just like on the TV for example.
While I was getting all this sorted out other parties were going full steam ahead with their own interests giving demos and selling stuff. There did not appear to be a great lack of the green stuff as many were in a buying mood.
Stuart Honeyball from Miracle Systems was there pushing his latest addition to the QL world, the QXL card, and doing good business which was evidenced by the number of bodies gathered around his table. The QXL card is a card that turns the PC into a QL compatible. I don’t have a PC and don’t imagine I will be getting one, so I was not too involved with being one of the many gawkers at his stand. And don’t ask me how much as I can’t remember the price.
Bill Richardson representing his own company, W.N.Richardson, was having no problems with empty space around his table. Plenty of goodies for all to buy. Bill was also selling subscriptions to QUANTA and seemed to be doing good business all around.
Tony Firshman of TF Services was there giving demos and passing stuff around. He was at the next table to our own, but I did not get much time to see what he was up to. All I knew was that when I wanted to leave my table to get a breath of air, I had to push my way past his adoring mob. He is very strong on HERMES which is the new processor to replace the 8049. HERMES is reputed to get rid of that key bounce, and also to operate at higher baud rates which is what is required for the modem operations, plus a whole lot of other improvements. I think I will get one myself. I believe Mechanical Affinity also have them.
Tim Swenson was in attendance with his QL Hackers Journal. (QHJ). For those who don’t know what this is, it is a journal put out by Tim for the advanced programmer, and it deals with many languages in depth. It is available in booklet form, and also on disk. He puts out a new issue about every couple of months. If you are interested I can let you have his address. I also have most of QHJ on disk in our library.
To my right was Mechanical Affinity with Paul Holmgren and Frank Davis in attendance, and every time I looked at Paul I got the impression of a bundle of $$$ in his fist. More like a bookie than a trader. Lucky Paul!
John Impellizzeri and his partner were there showing off their tower assembly where the QL and all its whatevers are enclosed in one neat little stack. Looks mighty impressive to me. I could not get a price out of him for the conversion etc., but it would appear to be quite a bit less than what I had heard rumour say initially. We will have to wait and see what the future produces, and just keep your fingers crossed – a one unit affair for the QL may not be too far away!
Then of course we had Bill Cable of Wood and Wind Computing, he it was who loaned me his spare QL. He was demonstrating his new program called QLerk, which he has been working on for a couple years or so – a program which is suitable to run a small business, or even your household finances. I have been privileged in having the opportunity to have a ver close look at this program, and while admitting there is going to be a period of getting to know QLerk, it is also a very comprehensive book-keeping system.
QLerk will write your cheques for you and keep the bank account in balance, (have you managed to do that yourself yet?) Looks after deductions, wages, accounts payable and receivable, prints purchase orders, balances up to five bank accounts, your wifes (wives?) petty(?) cash outputs, and also to the main thing, which is what is left for yourself at the end of the day. Not much these days I have to admit. Just be thankful for small mercies. egad – how small!
Bob Dyl was pushing IQLR which was the sponsor of the whole show. Thanks Bob.
NESQLUG utilised the serving hatch to the kitchen and provided us with donuts and soft drinks, just help yourself, and it was all for FREE. A very grateful thank to NESQLUG, and thank you for a wonderful idea. That was also a very popular section of the show.
Who else was there? A whole bunch of dedicated QL users from a young man not yet in his teens, to old fogies like myself.
I have probably missed someone out, and if so, please accept my apologies, and the wet noodle treatment would be appropriate!
After the show closed many of us attended a dinner at the Newport Beach Hotel, where we enjoyed an excellent meal, and many the tale was told at the many tables.
On Sunday, there were little meetings going on the rooms of the Carlton Motel. Lots of coming and going and interesting chatter about programs and what was in the future and all that jazz.
Tony Firshman was running a BBS on two QL’s connected by the serial ports, I could not get near it as there were so many crowded into a small bedroom, but from what I did see it was a most interesting couple of hours.
Miracle are still working on their graphics card which should be coming out fairly soon. Not too much was said about it or its price, but it is going give a very high resolution to the QL. A great deal of interest was evidenced by the questions being asked.
I came home on the Monday, but many stayed on to have a look around at Cape Cod and the surrounding country in general.
From what I gather the UK people are willing and keen to come back again next year, and since I have arrived home, I have been told that the German and some other continental suppliers of QL ware are interested in coming if there should be another convention over here, but I have heard that they would like to see it further inland the next time.
I have also heard the comment that there should have been more lead time to enable a more comprehensive advertising campaign, to generate a greater interest.
In discussion with an interested party, (trader) I asked what they thought of Toronto and was told that would be an ideal place for a convention. I said that I would like to see a Sinclair convention covering ALL the Sinclair computers, and this was thought to be possible.
My thinking, and let me say this right here and now, my thinking is not that of the other club officers, it is just my own solitary single idea off the top of my head. I am tossing this out for comment, and I hope to get plenty of comment.
Owing to the cost of accommodation and meeting places in Toronto, I feel that an ideal area would be in the Hamilton – Toronto corridor. In this area it is easier to move around than in Toronto itself. Accommodation is cheaper. And for anyone wishing to visit Toronto, there is the Queen Elizabeth Way (QEW) for fast commuting right into the heart of the downtown entertainment and shopping of centres of Toronto. There is also a bus service and a train service. The distance by QEW from Burlington to Toronto downtown is 32 miles.
This Hamilton-Toronto corridor is of easy access to travellers from all over. Those from the Eastern States would travel on the QEW, and for those from the South, it is only a few miles from the 401 on easy access highways.
As I have said earlier, lots of lead time is required for organisation and advertising. So if you would like to see this thing, I would like to know by reply exactly what your thoughts are.
Only if a certain level of support was indicated, would it be possible to start the ball rolling. So if you want to see this come off, write to me today and give me your views and comments. I am adding my address at the end of this so that you may write right away.
Remember if you want to see a Sinclair convention in the Toronto area, please write.
And when you write, please let us know what traders you would like to see there. Not all asked would come or be able to come, but at least we could ask them.
Was the Newport Miracle a success? I would say so, and so also would many others. Apart from the traders who appeared to be happy, the general consensus would be that everyone was happy to have attended and to have met so many old friends, and made so many new ones. Is that not what a convention is all about?
Hugh H. Howie,
QL Contact,
[address omitted]
[phone number omitted]