Notes on QL Lock-ups

See all articles from Sinc-Link v11 n2
Author(s): Hugh H. Howie
Publication: Sinc-Link
Pub Details: Sinc-Link v11 n2 (Volume 11, Issue 2)
Date: March/April 1993
Pages: 10

A while back someone mentioned that I appeared to be reasonably immune to QL crashes and lock-ups etc., and this made me stop and do a little bit thinking, which thoughts might be worth passing on to the rest of the intelligentsia out there.

It is true that I have had less problems than most in this respect. But I am not immune, I have had my fair share of them, but the fault does not necessarily lie with the QL.

When I took my equipment to a school to give a club demo, to be sure the QL would do weird and wonderful things. Between the smoke of frustration and the steam of boiler corks popping, the air was quite often a rich blue in color. When I got the QL back home everything was just fine and dandy. No problems except for getting it all connected up again.

I took notice of what went on at that school, and noticed that there were always, at least very frequently, some high powered floor polishers in operation. My thought was Power Surges, which I have not experienced much at home. Any problems I have had have mainly been of the odd chip sort of getting loose in the socket and having to be pressed back in again. Or a membrane having to be replaced.

Those who have been experienced crashing problems would seem to be living in apartments, or town houses, where there may be many types of equipment in use and possibly connected to the same source. I know of one person who has four QL’s and is only now starting to have some success with one of them. Power Surges?

OH Yes! I still get the odd crash, but it is usually because I have done something wrong with the software, like punching the wrong keys and the poor old QL just gives up in disgust and says if you are going to speak to me like that then I am going to bed. And it proceeds to do so. Big problem is that I don’t think like a computer.

When I made a trip to New Hampshire last year, I visited Bill Cable who is away out in the country, and he does not have Hydro. He has his own Solar System, which can be backed up by diesel. But during the three days I was there, we had as many as three QL’s networked, and they were all going at the the same time, and we did not have one single crash. That also meant three monitors and disk drives, and printers, and everybody trying to do something at the same time, and messages and programs flashing back and forth on the net. And in spite of all those different things and different operators, we did not have one single crash for any reason! And we were working from a Solar System, WITHOUT the diesel back-up being required.

As this was a monthly meeting of NESQLUG a number of members brought their own QL’s, resulting in a good cross reference of many users and units, and many configurations, such as Minerva, Gold & Trump cards etc. As I say, there was not one malfunction that I can recall.

I also use Micro-Drive successfully, my main problem is usually a faulty cartridge failing on me, not the QL. Incidentally while I am on about those pesky micro-drives; did you know that one very very common cause of failure is an attempt to OVER-WRITE on them. That is correct, you should always re-format a cartridge before putting anything on it.

Seems to be that it is possible to fragment a program and also a sector, and actually have segments of two programs on the same sector! So beware – format a micro-drive cartridge before a save, or even a re-save to a cartridge. Don’t ask me how this occurs as I don’t know.

Never over-write a cartridge.

Those who have solved the crash problem most successfully would appear to have had the Adam Coleco conversion done by Dan Elliott of Cabool. I understand this cures a lot of those surge ills. No I have not had it done myself, as I don’t think I need it from the number of crashes I do have. But I still keep this conversion in mind – just in case —

930103