About half of the subscribers to UP-DATE are owners of both the TS-2068 and the Sinclair QL, the latest member of the Orphan Computer family. Comments received about the QL range from pure disgust to enthusiastic praise. But there is one common denominator amongst the QL owners and that is a desire to learn how to use this strange computer. It is indeed a strange one (to me) and one that requires a considerable amount of study. Having only recently purchased a QL, I am not yet ready to become your QL Guru. So, let us begin learning the QL together while continuing to treat our TS-2068 as our primary system. Eventually the QL will become a work horse to endure for many years to come. But I am sure that my TS-2068 system will never be discarded no matter how useful the QL becomes.
We TS-2068 users enjoy several advantages when we begin to use the QL. First, with few exceptions, all of our programming knowledge can be transferred to the QL. The key-words and tokens mean the same. “QL BASIC” just gives us an expansion of the language that we have been using. So, that part of the QL learning curve should come fairly easy. Since we can use our learned TS-2068 language, this allows us to program the QL in “simplese” while picking up the more advanced QL BASIC and Super Basic. Then, as we upgrade, still more language extensions and capability are added, such as “super tool-kit”. In fact, the QL can become the most powerful of all personal computers available in the market places of the World, more powerful than the IBM XT.
There is also a PLUS with equipment compatability. Our disk drives and monitors are compatable with the QL. I first started off sharing a pair of 80 track drives and a RGB monitor with my TS-2068. But that soon became too much of a switching job and I gave in and spent some money on a second pair of drives and a Magnevox RGB monitor. WHICH, leads us into the subject of EXPENSE to get going with the QL. One can go “whole hog” as I did, or progress in stages. A composite monitor can be picked up for as little as $65.00 via catalog shopping while letting the budget build up for a RGB monitor. And, a full page width serial printer can be purchased for as little as $39.95. I have one of these old IBM thermal printers to do listings and scratch printing.
There have been many comments to the effect that “By the time one buys disk drives, monitor, and Trump Card, one has enough invested to have purchased a IBM Clone system”. So, let us look at that first. “SYSTEM” is the key word. If you carefully examine the adverisments for IBM systems (Clones), you will find that a COLOR system, with 2 disk drives, with 600K of memory, will cost about $1800.00. Then you’ll need to add a printer. My QL system cost was: $75.00 for the QL, $300.00 for the Trump Card, $300.00 for a RGB Monitor, which comes to $675.00. This is about the price of a “starter” IBM XT Clone with only 256K of memory, no monitor, and one 360K drive. It would take another $900.00 to upgrade the IBM to “aproximate” the capability of this QL system.
Really we are comparing Zebras to horses. The QL and the IBM are totally different critters. In my way of thinking a IBM system locks one into a “closed system”, while the QL provides versatility. The Trump Card gives 896K of RAM memory, where the IBM is not that expandable. Even more ROM memory can be tagged on in cartridges. Much is said about the need to be “IBM Compatable”. For what reason? Why try to be compatable with an INFERIOR system, and when such compatability reduces one to a lesser level of capability? The QL has more capability than the IBM XT. We just need to learn to tap that capability. If we need to compare the QL with a computer of similiar capabilities, the computer would be the Northgate 386, a 32 bit CPU powerhouse, as is the QL.
The price tag of the QL reveals a fact that needs to be understood by all. The computer was not ready for marketing. Because of that, the reviews of the QL were all bad- very bad- CRUEL- and Killing! While designed to sell for around $600.00 for the basic machine, reviews killed it and its price plummeted to $75.00. Now the few remaining QLs in stock are priced higher, and soon none will be available. An estimated 8000 QL computers were sold in the USA and Canada. So, we QL owners are rather few in numbers on this side of the Atlantic. However, the QL is a popular computer in the UK and supporting hardware and software are plentiful. Because of the low price and the known end to QL production, many American buyers bought a spare QL. I would advise any who did not to do so quickly.
The QL, as it is purchased, has quality control deficiencies that need to be (must be) corrected. The easiest path to take is to send the QL to Tom Bent, 9015 Flicker Place, Columbia, MD 21045. Tom does a series of fixes that corrects the problems. I will go through these. 1. The QL Power regulator needs to be fixed. As purchased it creates too much heat which causes crashes after a hour or so of operation. 2. Some CPU chips overheat and need to be evaluated, replaced if necessary. 3. The existing two ROM chips are high power consumers and need to be replaced with one EPROM which runs cooler and also corrects some ROM bugs. The new EPROM also contains several very worth while additions to the QL operating system which are normally sold in (add on) ROM cartridges.
4. The IC that provides Television monitoring is removed (optional). This reduces both internal noise and relieves the load on the power regulator, but eliminates the capability of using a TV for monitoring. 5. The “Spider board” needs re-soldering. As purchased, the spider board has loose connections that cause crashes. 6. A lube job is needed! Tom uses WD-40 to free up the keyboard keys and make them operate smoothly. 7. The RGB output needs Buffering. All of these fixes are needed. You can either have them done or do them yourself. But for the QL to operate successfully, these fixes are necessary. Quantum Levels magazine has devoted quite a bit of space to describing these problems.
To accomplish all of the above fixes, Tom charges about $65.00. This is really a bargain, especially if you consider that the addtions to the ROM, if bought in a Rom cartridge costs that much. Tom Bent is the Editor of Quantum Levels and one of the best authorities on the QL. I highly recommend that every QL owner subscribe to Quantum Levels, which is the only North American publication exclusively devoted to the QL users. Quantum Levels started only about two years ago and I advise getting all back issues. A new QL magazine has been announced. “QL USA” has not yet published its first issue. If interested, write to: Bill Fischer, 419 Parkwood Dr. E., Orange Park, FL 32073 (editor publisher).
So, now you know why one could buy a QL for as little as $75.00, which is far less than the total cost of the IC chips contained in the computer. The QL simply was not ready to be marketed and Sir Clive payed the price for not fixing all of the bugs before going into production. Then the deficiencies in production line quality control was the final thing that did him in. One can look at it this way. We buy the computer in two stages. The first stage is buying the QL for $75 – $100. The second stage is getting its bugs fixed for about $65.00. Then we can go about assembling a SYSTEM, including the monitor, the printer, memory expansion, and disk system. This is a new concept for buying things and is kinda hard to get accustomed to.
Presently there are two devices that provide both Memory upgrade to 896K RAM, additional ROM, and a Disk Drive controller. One is the TRUMP CARD and the other is the SANDY BOARD. Both contain extra ROM that provides a plethora of additional Super Basic functions. AND, both are quite expensive, around $300.00. One can delay such upgrades and still have a QL system that is quite capable, more capable and more powerful than a un-expanded IBM XT. The four Pison Softwares, which comes with the QL, are excellent and they represent a combined value of at least $300.00 when compared with any software group offered for the IBM. These three softwares work well with a un-expanded QL. Some users may not ever need more software capbility.
The two Micro Drives are the legacies of Sir Clive Sinclair who spent a decade perfecting the highest speed low cost tape deck in the World today. While I prefer using Disk Drives, the two micro drives do add to the QL’s capabilities.
I have already found that the two micro drives provide excellent and reliable mass storage. Operation is faster than disk drive with the Commodore, but slower than disk drive with the TS-2068. Never the less, micro drive lets one wait until one’s budget is ready for the expense of up-grading to Trump and a disk drive system. Even then there is a means available to upgrade in stages. The Trump card provides the huge memory expansion, plus a great increase in Super Basic functions, plus a disk drive controller, plus RAM DISK. The addition of disk drive can be delayed as the final stage of upgrade. RAM DISK with Trump Card lets one operate “as if there were a disk drive”, then save the data or program to micro drive when finished.
Since most QL users have a spare QL (insurance), why let the spare lay around collecting dust? It can be “networked” with the main QL by simple means of connecting a single conductor wire between computers. The distance limit between computers has not yet been found, but would certainly be as far as from one corner of the house to another. Since “networking” is an exclusive capability of the QL you wont find much published information about the principle. This capability is usually the domain of very expensive “main frame” computers. Briefly, the “networked” computers use their own memory for operation, plus that of the HOST computer, and can operate any peripheal that is attached to either. For example, my son can be in his room doing a college report. When finished, he sends the data to be printed with the printer that is connected to the main QL computer. During the process, the micro drives and disk drives that are connected to either computer can be used for both programs and data saves and loads. This is kinda mind boggling to me, but I’m inquisitive enough to “try” to take it to the limit.
The Printer: There are some very good bargains in printers now a days, especially SERIAL printers. Serial printers connect directly to the serial I/O ports (2) of the QL. Most of us are not familiar with the computer syntax to print with serial printers. My first week of QL ownership was devoted to figuring out how to use a printer. This does it with a serial printer connected to Serial Port #2: <10 OPEN #4,ser2c> <20 BAUD 9600> <30 PRINT #4,”This is a Serial Printer”> <40 PRINT #4> <50 LIST #4> <60 CLOSE #4>. Missing in QL Basic are our familiar LPRINT and LLIST. Instead we must OPEN a channel to the printer and then use PRINT or LIST. To use a Parallel Centronics printer one needs to purchase a Parallel Interface.
A suggestion (as I am doing): To make myself learn the QL and QUILL, I am beginning to do all correspondance with the QL and QUILL, and my more serious data processing and publishing with the TS-2068. Later the priority may be reversed. How about “maintainability” of the QL? Well, we all have some experience with that subject, dont we? Already we have two sources for repairs, Tom Bent and Dan Elliott. And, if you think that IBM Clones are repaired everywhere, you are a good prospective customer for the salesman of snake oil, hair growing lotion, and astrology predictions. Even the giant Tandy Corp. does not have full repair capability for their IBM Clones. One does not buy maintainability when one buys a IBM Clone.
So, belay your fears! The QL is a good computer, better than any other that one can buy for less than about $2000.00. It can be fixed when it breaks. It is expandable in stages. It will take us at least a year of study and usage to learn what the QL can do for us, and it will serve us well for many years. Now the QL user Group becomes another select group of independant thinkers, as unique as we TS-2068 users. Both refuse to ride the main stream of mediocrity. And neither accepts the idea that a popular Name Brand necessarily means the best. Both groups look to learning as a challenge and help each other to that end. Both groups will survive will take it to the limit!
UP-DATE invites more qualified users to help out in coverage of the QL- to help us novices to learn this fine computer. The disparaging comments about the QL and its bugs in this article will stand as the only group of negativisms as UP-DATE launches into support of “Computing with the Sinclair QL”. However “bug reports and the details of their fixes” will be covered, along with programming, software operation, the availability of products, and the whole range of user interest subjects. And, there are plenty of subjects to cover. After studying the QL manual, the Trump Card manual, and the Speed Screen manual, I have hundreds of questions that need answers. The QL is a BIG and highly diversified computer. I would compare the learning task with that of a stranger to San Francisco who has just been hired as a taxi driver. Fortuntely for us, we can learn a segment of functions at a time and continue to progress through the learning curve. It should be a lot of fun and also productive.