Because of holiday scheduling, increased work load, and family illness, it has been a number of issues since my last report.
You will be delighted to know we have had our first enquiry about the newest addition to the Sinclair Family: The Z88. Computer programmer Mr. Charles Bagnal of Level 7 Research in Toronto purchased one at Dixon’s in England and is thrilled with it. He is willing to meet with anyone interested in purchasing one and give a demonstration and would like to join the club when there are members he can interact with. I told him that from all reports he might not have to wait long. His phone number can be obtained through me at anytime.
On the QL scene I recently spoke to Mr. John Gordon of Lytons who informed me that Lytons is in the process of doing a feasability study of the possibility of using three QL’s for on line diagnostic system testing and monitoring.
I recently received a copy of the Quanta QL software library on disc. I understand the latest release is on 15 discs. My release consisted of 10 discs DSDD 720K per disc.
Some of the programmes had a small royalty charge attached but many are free and under the Quanta constitution can be freely exchanged between members and member groups. I would also like to thank Real Gagnon on behalf of our membership for a contribuion of freeware to our QL library. Real Gagnon is the SIN Editeur in Montreal, Quebec. He has sent us: a window designer ( a utility to help design windows); a solitaire game; a caps utility that adds two new keywords to superbasic, they turn caps lock on and off; a label making program; a TRAduction programme for utilization of the TRA funcions; a swap programme for remaming devices in a programme; a blank programme to blank the screen if there is no activity for three- minutes, space reactivates the screen; a link programme to link your library of superbasic extensions and a hex/binary programme to translate hex files to binary or binary to hex. Real’s disc has been updated with all the current library files and after some delay is now on route back to him with both our thanks and our compliments for his fine programming and support.
I recently received a circular from Ron Gowan of RMG outlining the content and availability of Video cassettes of the 7 seminars that took place at the Seattle Mini Fair. These seminars cover all areas of Timex/Sinclair computing from machine code programming on the ZX81 by Fred Nachbar, to programming with your QL. At $15.95 US it sounds like a resourse that no Timex/Sinclair users group should be without.
I finally received my SCSI+ floppy interface forthe QL from CST but not before I telephoned to find out why it took three months to come. I found out that the customs forms had changed and combined with the Christmas holidays it accounted for the delay. At first glance it is identical to the CST Q-disc floppy interface, although on closer examination we find the board to be much more densly populated with a 36 pin connector for hard drive and a 26 pin for Sugart standard floppies. The interface will accept up to 8 hard disc drived and two floppies. It is designed to work with the Rodime compatible Winchester RO 652 or a Miniscrive 8425 S. Now all we need is a good inexpensive sourse for either of these drives. Anyone who knows of one can pass this information along to us all by writing to the:
QL Wayfarer
[address omitted]
February, 1988
QL Tips
Joe E. Jenkins of Amarillo, Texas writes;
“When I finish typing in a program listing and I want to EDIT it, I ENTER EDIT and first line number. I then use the “down” arrow to advance line by line to carefully check for errors.”
Bill Lawson says:”This tip is also helpful if you are using “AUTO” (for automatic numbering). Should you discover, after entering a line, that there is an error, use the “up” arrow to bring the line back into the work area, correct the error and use the “down” arrow to move to your next “AUTO” number.”
J.E.J. also sends this tip: If you have a Quill program that is too long for Quill to print, save it on microdrive and then, COPY MDV1_ or 2_”filename” to SCR (for screen monitor) or MDV#_filename to SER1 (for printer). Don’t forget to open a channel to SER1.