OK. This is my first post to the list… I’ve been reading all the past postings and think I can help answer a few questions on old Sinclairs (I’ve lost touch recently.) I have literally dozens of books which I can give details of for the bibliography, and I can give details of magazines etc. Unfortunately all this stuff is 50 miles away from where I am now, so you’ll have to rely on my memory until I can get back home!
As far as I’m concerned, this mailing list is just one big nostalgia trip for me! I started with a ZX81, and moved onto a 48K Speccy, then a Speccy 128. Admittedly my main use was games (well I was 13/14 at the time) and learning to program. The Speccy was just perfect to learn BASIC on, what with it’s friendly user interface and one-key BASIC entry. I started learning Z80 code on it as well, but never really fully got my teeth into it (-;
I realize a lot of you will know most of Sinclair’s history, but I thought I’d give details as I know it of all Sinclair machines to present. Maybe I might mention something you didn’t know, and well, as I said, nostalgia! (-;
pre-80 Wasn’t there some mail order kit computer by Sinclair Research? Perhaps I’m thinking of Acorn Computers… [It was a programmable calculator! NAP.]
1980 ZX80 – white case, blue touch sensitive keys, 4K (?) ROM, 1K RAM, cassette interface, b/w character based screen, no sound. The video circuitry (or the processor?) couldn’t do too many things at once, so, for instance, every time a key was press the screen would blank out, ie flash for a split second! A 4K RAMpack was available, to give the user 4K of RAM (not 5). ZX80 available in kit form or ready made. Simple ZX BASIC on-board, using one-key entry system. Not much software ever available.
1981 ZX81 – basically a ZX80 with an 8K ROM. For some time you could buy an 8K ROM upgrade for the ’80 which would turn your ’80 pretty well into an ’81. However the ’80 video circuitry wasn’t up to SLOW mode, so the flashing was still present. Black case, black and grey t/s keys, 8K ROM, 1K RAM (actually less of this 1K was available to the user than in the ’80 because there were more system variables in the ’81 than the ’80), cassette, same screen, no sound. 16K RAMpack available. ZX printer (thermal, 12 (?) cm wide silver paper, made a horrible noise!) ZX81 available in kit form or ready made. The ZX BASIC in this was improved with better string handling (the ’80 used the standard, but inflexible LEFT$ etc. The ’81 and the Speccy used A$(x TO y) where x and y are the left and right ends of the substring.) Used one-key entry system for BASIC. The RAMpack connection to the computer was very dodgy and led to the unfortunate problem of ‘RAMpack wobble’ -the computer crashing and losing all data if the user tried doing anything physically unusual with the machine, like pressing a key!
1982 ZX Spectrum – now this is more like it! Colour, sound, 16K or 48K RAM, 16K ROM, black case, grey rubber keys (that actually moved! The keys were criticized at the time, but though they were not good for typing, they were never bettered for games playing), cassette based, the sound came out of an internal beeper (speaker!). An upgrade from the 16K to the 48K was made available as a user upgrade (plug a few chips in) but the computer itself was not available as a kit any more. The ZX printer would plug into the Speccy, but not (for instance) the ZX81 16K RAMpack. Had 15 colours (supposedly 8 logical RGB colours each of which could be BRIGHT, but BRIGHT black was the same as normal black.) 1 channel sound, though software packages, games etc, often increased this in software. Check out Agent X – 5 channel music! Still one-key entry BASIC.
1983(?) ZX Interface 1 – for the Speccy, an RS232 interface (non-standard connections), a network interface (hmmm… nothing ever came of that!), and a Microdrive interface. The Microdrive was an infinite tape loop storage system, pretty slow (faster than cassette of course), with about 80K on a single microdrive cartridge. A lot of Spectrum programs had to be changed to work in conjunction with an Interface 1 due to the extra system variables in the memory map. The Interface 1 contained a ‘shadow’ 16K ROM which was paged in whenever a BASIC error occurred. This allowed it to trap commands which would be errors, Eg LOAD *”m”;1;”prog”, and use these to load from microdrive. Good hackers could also use this to extend ZX BASIC.
ZX Interface 2 – a Speccy games cartridge and 2 joystick interface. The cartridges initially seemed a good idea, instant loading, good software protection etc, but what was not announced and what was not realized at the time was that they could hold a maximum of 16K, because they were paged in in place of the Spectrum ROM. Only a few games were ever released for it – Jetpac, Psst etc. The joystick ports were standard Atari 9-pin jobs, mapped to keys 1-5, and 6-0. These could be read by an IN 65xxx command, which unfortunately went against the already standard Kempston design which used IN 31. All games up to the present time support both standards, and additionally the cursor key standard for a variety of other joystick interfaces.
1984 Sinclair QL – no idea of ROM size, [48K. NAP], 128K (?) RAM, improved keyboard over the Speccy (in Sinclair’s opinion), used 68008 processor – a deviation from the Z80 in all their previous micros. Contained SuperBASIC, an even more improved ZX BASIC with procedures etc. The intention was that the ZX tag would be continued for Sinclair’s home computers, while the QL tag would be used for the professional, business range. The QL adverts claimed ‘There’s no comparison table, because there’s no comparison.’ At the time it had a pretty good spec, certainly better than the PCs of the time. It had an internal microdrive (incompatible to the ZX Microdrive format) and no cassette interface. Graphics were colour, up to 512 by 196 (?), similar to the Speccy’s. Sound was still single channel. There were a whole load of production problems early on – the first models had chips hanging out the back of the case (did I mention the black case?), apparently half the BASIC didn’t work, (QL owners used to read the manual and dream of how good their computer could be if all that was in the manual was implemented!), and though things only got better, the QL had a bad reputation from the start. Sinclair’s notorious practice of advertising things as ready for sale before they were even finished (as happened with the Speccy and the Microdrives) didn’t help. This was in the days when Sinclair Research only sold via mail order and there were massive backlogs of orders. The one-key entry system was dropped in favour of a traditional letter by letter spelling out system for BASIC.
1985(?) ZX Spectrum + – a Speccy 48 in a QL style keyboard, with a reset button to save wear and tear on the power lead (the Speccys had their equivalent of RAMpack wobble, which was the power lead wobble effect, because pulling out and replacing the power lead was the easiest way to reset the Spectrum!) Bit of a rip-off really, though the keyboard could be bought as a kit upgrade. This was Sinclair’s answer to all the third party keyboard upgrades, such as the ones by DKtronics, Saga (?) keyboards etc. The first shipments (as given to the magazines for review, who immediately noted it) had dodgy keys which fell out if the machine was turned upside down and its bottom hit! (Though why the magazines all performed this particular test is a mystery to me!)
1986(?) ZX Spectrum 128 – the first real update to the Speccy since ’82. 32K (?) ROM, 128K RAM (48K as normal, the rest configured for BASIC use as an 80K RAM disc, accessed by LOAD !”prog” – actually paged in and out in 8K (?) pages), Speccy + black case (notice any consistency in the Sinclair colour scheme? (-;) with a massive heat sink on the right hand side, which looked like it would get incredibly hot, but actually got pleasantly warm enough to keep you hands warm on one of those late night Winter hacking sessions! Same graphics spec, 3 channel AY-3-8912 sound (the AY seemed a bit long in the tooth in 1986, it was 10 (?) years old by then, but at least it was a proven design), built in RS232 interface (details in the (very slim) manual only for how to use this with printers – it also had a different way of accessing it to the Interface 1), MIDI OUT socket (same socket as RS232, nicely implemented in 128 BASIC), keypad socket (the keypad had a cursor key and numeric keypad cluster on it as a separate colour-coordinated box, though it never appeared outside Spain!) Had a nice menu on power up to choose 48 or 128 mode. 128 BASIC used a letter by letter system similar to the QL, with a screen editor built in.
1986(?) On a sad day for home computing, Sinclair Research’s micro division was sold to Amstrad (spit!), makers of the rival Z80 systems- the CPC464, CPC664, CPC6128 etc. Amstrad soon dropped support for the CPCs, instead concentrating on the superior (-;) Speccy system. They first released the Sinclair: (they continued using the name and logo)
ZX Spectrum +2 – a Speccy 128 in a grey case (what’s this, grey??!!), which had a proper full travel keyboard, and a cassette drive ‘glued-on’ (Alan Michael Sugar’s words (AMStrad boss)) to the right hand side. The grey colour and the cassette drive made it look suspiciously like a CPC at first glance, a fact that many old Speccy hands resented. The keyboard tops lost the keywords, which made 48 BASIC programming tricky, though of course Amstrad (and Sinclair before that) assumed most would used 128 BASIC. The only other changes were alterations of the copyright messages in the ROMs to (c) 1986 Amstrad, even in the 48 BASIC ROM, which in the Spectrum 128 still said (c) 1982 Sinclair Research. Also this was the first Spectrum with built-in joystick ports, using the same system as the Interface 1, but perverse as Amstrad were/are, they are the only micro in the world to use a different 9-pin layout to the Atari standard of 10 years! Converters were soon available from a number of third parties (similar to the gender changers for RS232 etc).
1987(?) ZX Spectrum +3 – a Speccy +2 with totally redesigned circuit board, and a 3 inch disc drive in place of the cassette drive (a cassette interface was of course provided). In a black case (evidently someone complained about the +2!) with similar keyboard, ports etc to the +2. The ROMs also changed some more with the 80K RAM disc being accessed as drive M, eg LOAD “M:prog” instead of LOAD !”prog”. The improved circuit board design was later used in the:
ZX Spectrum +2A (never an official name, I believe) – which looked like a +2 but in a black (hurrah!) case. It used the M: notation for the RAM disc, and had a port to add an external 3 inch disc drive.
And that’s about it, unless you include the ICL One-Per-Desk microdrive based system, and the Timexs, which I know little about. Of course there is the MGT SAM Coupe – a super-Spectrum launched in 1989(?), with vastly improved graphics, sound, disc drives etc. It can give an ST a run for its money (it sold/sells for around 120 quid).
That’ll do for this posting. I have information on books and magazines (as I said) for some future date, and also some thoughts on the various emulators available.
Pelago
John Veness
Dept of Computer Science
RHBNC, Egham
Surrey, TW20 0EX
[e-mail address omitted]
