HARDWARE REVIEW
Smith Corona FASTEXT 80
Dot matrix Centronics printer
Cost: $239.00 Cdn.
Available from : Ogilvies
Remarks:
After many years of using the 2040 Timex printer, I finally broke my wife down and went out and bought a real honest to goodness dot matrix printer. I didn’t hurt her much, I swear!
The obvious question that I ask myself now is, How did I do for so long without? I was even using my 2040 to send letters to companies and I even got a query concerning the quality of toilet paper that I was using! Imagine that.
To the review..
The reason I purchased this particular printer was primarily due to the price. You have to admit that $239.00 is a good price. The second reason is that I was witness to a demo of the printer at the local Ogilvies. The printer was conected to an Apple IIC and was showing off its graphic printing facilities. Impressive to say the least! Not only could it pump out graphics, but it can type out in Pica, Elite, ENLARGED, condensed, at 5, 6 or 8.3 16.7 characters per inch, and can do graphics at 60 or 72 dots per inch. Normal text printing is fast with bi-directional printing as standard and uni-directional for graphics. It also has a repetoire of 8 built-in character sets!
The printer comes as friction feed standard and a form feeder is difficult to get. I found a good substitute. Radio Shack sells a printer DMP 105 that overlooking the exterior casing is identical. The tractor feed for the Radio Shack printer fits the Smith Corona like a glove, problem solved.(cost of tractor feed- $29.00)
The second thing that will be of concern is the print ribbon. Ogilvies sells a dual cartridge package for $29.00. If this seems a steep price, your right. Instead go to your trusty Radio Shack and pick up one printer ribbon cartridge for the DMP 105 for $10.00 . Problems all solved!
As you can see from this article, the printer works rather well, wouldn’t you say? By the way, the print for this text is in condensed mode, and a ribbon cartridge should last for 1 million characters. There’s not much more to know about the printer, but you will be required to find a suitable interface for it and as well, the correct cable. The Aerco, Tasman and Oliger interfaces work very well. If you get the Oliger interface, you will also get the appropriate software to run it. Software packages such as Mscript and Tasword already funtion without the printer software.
If you would like to learn more about this printer, feel free to contact me through this newsletter.
R.Mulder