Summary
This is the first part of a hardware project for the ZX81/TS1000 that puts the computer’s unused on-board 1K-2K RAM back to work once a 16K RAM pack is fitted. It explains how the internal RAM is switched off through its chip-select line and how a small decoder circuit built on a 74LS27 can map that RAM into the 8192-16383 area normally taken by a repeat of the ROM, where machine code survives LOAD, NEW and (with a switch) crashes. It includes a hardware caution, a schematic of the RAM/ROM decoder with a RESET switch, and an author’s addendum warning that newer TS1000 circuit boards differ from the ZX81 layout.
To be continued next issue
Reprinted from SYNC, March/April 1984, by Randall S. Glidden. The original article is on this site: The Great RAM Rescue.