The UPDATE Computer Desk

Author(s): Bill Jones
Publication: Update Magazine
Pub Details: Update October 1989
Date: October 1989
Pages: 50

Several have ask about how things are set up at the UPDATE Computer room. So, we will use a couple of pages to discribe the lash up. The sketch on the facing page gives a busy diagram of the three computer and two printer system. Not shown is the miriad of power and interface cabling. The whole system is set up on a “door blank”, purchased from a lumber yard, varnished to a nice finish. This desk top sits upon three cabinets that have shelves. These teakwood cabinets have ornate picture carvings and were sent home from Thailand during the Viet Nam war. So the entire computer desk is quite attractive.

When such a system is first installed the biggest problem is to avoid getting caught in the spider web of cabling. This requires some planning. Four 6 outlet receptacle boxes are used. Two of them have both voltage spike and RFI protection. The equipment was first placed into position and then the cabling was run to the rear of the desk and lashed up into trunk lines, the surplus lengths folded back and tied. All of the equipment was purchased from our own Sinclair Suppliers over a period of time, which avoided difficulty with cables and connectors not matching.

THE DISK CABINETS: One for the QL has 2 80 track drives. One for the TS-2068 has three 80 track drives and a 40 track. Another for the TS-2068 has two 40 track drives. It is common practice to change drive unit Data Cables while power is on in order to copy disks of different mixtures, 80 to 80, 40 to 40, or 80 to 40. This is quite safe with Shughurt DOS systems. Both monitors sit upon stands that allow equipment to be positioned underneath. Under the QL Monitor is the Coleco Adam Power supply and an A/C receptacle unit. Beneath the TS-2068 monitor is the extension to the I/O bus, the A/B switches, and the Printer Buffer.

The QL System has Trump Card, EPROM for ROM change, and Speed Screen in ROM. A spare QL has different tool kits than the main. The TS-2068 system is really stacked up, having a minimum system configuration of 344K with the Aerco FD-68 or up to 424K with the combo of LKDOS and Oliger DOS. The main TS-2068 has the (Dan Elliott) modification to provide external power for all external devices connected to the I/O port. This modification was done to the computer itself and a switch added to the rear deck to allow either Timex Power or Coleco Power to the external devices. With power supplied by the Coleco P/S the TS-2068 voltage reg is protected from overload.

The TS-2068 has five Disk Operating systems: 1. Larken LKDOS, 2. Oliger DOS, 3. Aerco FD-68 DOS, 4. MAX DOS, a combo of STACKED LKDOS and Oliger DOS, 5. Stacked Oliger DOS and SPDOS. Actually there is a possibility of another by having the Oliger DOS, LKDOS, and SPDOS in a stacked environment. SPDOS is the “Millenia K” system DOS that resides in RAM.

The PRINTING set up allows either computer to use print buffer and either printer. This allows different print styles to be used at the flip of a switch. Also, the print buffer in this set up allows the output data of three computers to be combined in the print buffer for printing in the same document. Alternate capability exists to hook up two QL’s or two TS-2068s as “computers A and B”, or to hook up either spare in the position that the Z88 is shown.

TELECOMPUTING: There is a capability for the QL and TS-2068 to transfer ASCII files to each other via two modems and two telephone lines which are terminated at the computer desk. Or, both computers can be downloading files from two different BBS at the same time. Much of the capabilities have languished for lack of time to devote to the tasks. While the entire system fits nicely upon the “door top desk”, there is need for side board desk top space to store disks and the large library of manuals. So, the computer corner has wrap around desks in a “U” shape. The entire floor space requirement is about 8X10 feet.

The Desk Top - Total cost compares with a medium equipped IBM XT. (Hand-drawn sketch: QL with RGB Magnavox monitor and Coleco Adam power supply, two 80-track drives; A and B printers; Z88; TS-2068 with RGB Sanyo monitor, tape, TS-2040, disk drives and modem.) Did you know that a mahogany faced door is cheaper than a 4x8 sheet of plywood? Crazy, eh?
The Desk Top – Total cost compares with a medium equipped IBM XT. (Hand-drawn sketch: QL with RGB Magnavox monitor and Coleco Adam power supply, two 80-track drives; A and B printers; Z88; TS-2068 with RGB Sanyo monitor, tape, TS-2040, disk drives and modem.) Did you know that a mahogany faced door is cheaper than a 4×8 sheet of plywood? Crazy, eh?