The Z88 is particularly well suited for communicating to modems and other computers. A serial port which communicates up to 38,400 baud, a VT52 terminal program and a dedicated file transfer utility are included with the stock Z88. The Z88 also weighs only 2 pounds and is easily transported right next to the device you want to communicate with.
My Z88 is mainly used to talk to a pocket modem and a QL. Z88 files are archived on a QL disk. I also occasionally communicate with PCs at work and other Z88s.
I have designed and built cables to communicate with the QL, PCs and other Z88s. I built the modem cable from recommended pinouts by Cambridge.
The QL cable is as follows:
Z88 QL SER2 --- -- ---- 2 ----------------- 3 3 ----------------- 2 !-4 ----- 4 !-5 ! 5 6 ! 6 7 ------------!---- 7 !-8 ------------! 8 !-9 9
I have tried several other designs for a Z88 – QL cable but have not found a cable that works as well for transfering files.
What I use to transfer files are Q_Link for the QL and Z88COM for the Z88. Q_Link is a shareware terminal program from Harvey Taylor. It includes CRC and Checksum xmodem as well as many other features. Z88COM is a publicly available terminal program from Phil Wheeler. It extends the built-in VT52 with checksum xmodem and some other features. Phil also operates the Z88 BBS in Los Angeles.
I basically connect the computers with the cable and run terminal programs which utilize xmodem on each machine. You set up one machine to send and one to receive. Then you start the transfer on both machines at the same time.
You can transfer ascii files without xmodem by various means but I prefer to use xmodem. It provides error checking in the transfer so you know the files are transfered OK. You can also transfer any type of file even machine language.
Z88 to PC and Z88 to Z88 transfers work similarly. On the PC I prefer to use PROCOMM. It is a powerful program and extremely easy to use. I would like to see it made available for the QL. For Z88 to Z88 transfers I am using Z88COM on both machines.
The Z88 – PC and Z88 – Z88 cables are as follows:
Z88 DB9 PC DB25
--- --- -- ----
2 ------------- 3
3 ------------- 2
!-4 4-!
!-5 5-!
6 6-!
7 ------------- 7 !
8 -------! 8-!
!
!----- 20
Z88 Z88 --- --- 2 ----------- 3 3 ----------- 2 !-4 4-! !-5 5-! 6 6 7 ----------- 7 8 ----------- 9 9 ----------- 8
There also is a variation on Z88COM called Link by Dave Armstrong which turns the Z88 into a mini BBS. There are no message facilities but you can transfer files. All typing is done at a remote computer. The Z88 just sits there. It is similar to PROCOMMs Host Mode. It works well connected to a computer in the same room. Modem facilities were removed from this variation but you can connect to the modem and then switch to Link by hand. With this program you can transfer files with someone across town at a prearranged time. You could even transfer QL and 2068 files.
There also is another program available for the Z88 called ZFU by Richard Haw. This is a utility which takes many files and archives them into one large file. In the process it compresses the files so the resulting large file is much smaller. You can archive all the files in all the ram devices of the Z88 into one file and just backup that one file to your QL or whatever.
The Z88 also works nicely with any Hayes compatible modem.
Here are the official modem pinouts from Cambridge:
Z88 Modem --- ----- 2 ---------- 2 3 ---------- 3 7 ---------- 7 5 ---------- 20 8 ---------- 20 9 ---------- 20
The Z88 includes a built-in VT52 terminal emulator. It works quite nicely although you have to dial manually with Hayes AT commands. It is also easy to send and receive ascii files with just the built-in software. The built-in VT52 also connects quite nicely to a VAX mini computer once you tell the VAX you have a VT52 with 8 lines.
But I like Xmodem. A terminal program was developed in England which provides xmodem. The disadvantages of this program are its high cost and it also adds its own protocol in place of the VT52. The built-in VT52 works much better.
Fortunately Z88COM came out which provides xmodem but works in concert with the built-in VT52. Z88COM is also much cheaper. In most cases it is available for the cost of a download. Z88COM can also autodial and autologon to five systems. It has a message upload feature for sending text files. All in all it is a great program.
The latest I heard was that Cambridge just came out with a VT100 terminal program. I have not heard too much about this. The VT100 can display graphics from a remote IBM or VAX. It moves the cursor around your screen on command from the remote system. I am not too sure how well this will work on the Z88 with its 8 line screen but it sounds interesting.
The Z88s portability and sheer connectivity to anything speaking RS232 make it a great little computer for telecommunications.
HARK Z88 USERS: (WHAT A NICE GUY!!)
Dear Bill, I have been trying to promote the Z88 for about two years. I have about 350K of Z88 programs and related QL programs that were downloaded from two main Z88 BBS: 703-968-9438, 213-370-2754, and GEnie.
I can put the files on a QL 720 sector disk or a IBM 360K disk. In the case of the IBM disk I will substitute some IBM programs instead of QL programs. See below:
Z88 Public Domain and Shareware Programs:
(Approx 350K of files)
Available on QL DSDD 720 sector disk or IBM 360K disk. The QL disk includes Z88 related QL programs. The IBM disk includes IBM related files.
PRICE: A dollar to pay for mailing, or two dollars to mail in a disk mailer.
David Bennett
329 R. Walton St.
Lemoyne, PA 17043