One of the problems with producing this newsletter is that my material comes from many sources and many printers. While I’m very happy to receive all this good stuff from our numerous contributors, I’m often less than thrilled with the print quality of the copy I get. Read that carefully: I’m happy with content, not always happy with product.
I try to make Sinc-Link look as good as possible but some of the articles I get are so faded or lightly printed that even with the considerable print-enhancing features of my copier I can still only produce a barely readable copy. Since I promise to print everything I get, and it’s all excellent material, this sometimes hurts how the newsletter looks. What to do?
I could retype and print all the articles myself but I have neither the time nor the inclination to do so. You could send your articles on tape or disk and I’d be happy to print them out but it might not look as good as your version and the newsletter would acquire a sort of boring sameness. What to do?
There is a simpler solution, of course. Keep your printer ribbon fresh. Either replace it or re-ink it regularly. What’s the point of going to the trouble of writing an article for people to read if people can’t read or copy the end product? Think about it, please.
To this end I’ve included a simple program for TS2068 users of Epson-compatible printers and the Larken system. Simply install it, run it, then load your word processor. When you print in NLQ mode your characters will be struck four times. Makes text nice and dark. Enough whining, already.
1 REM Renato Zannese, Toronto Timex-Sinclair Users Club
2 REM Print Enhancer
5 RANDOMIZE USR 100: OPEN #3,"lp"
10 RANDOMIZE USR 100: POKE 16093,32
20 LPRINT CHR$ 9;CHR$ 27;CHR$ 104;CHR$ 0
21 REM Change CHR$ 0 to 1 for double-height text or to 2 for
quad-height text.
25 LPRINT CHR$ 27;CHR$ 71;CHR$ 9
30 RANDOMIZE USR 100: POKE 16093,0
40 LPRINT "This is Normal-Sized, Double-Struck."
Bye, Renato
Renato Zannese, long-time club member, newsletter contributor and club 2068 tape librarian has moved on to bigger (and better?) things. This is the guy who first introduced me to this club back in my TS1000 days and and found me my first TS2068. Several members have his own-designed Kempston interface and have had defective computers fixed by him. The program above is one of his little gems. Bye, Renato, and good luck.
Cover
The Space Shuttle and text are from Byte Power‘s “Print Factory“ and “Companion” desk top publisher and super screen suite for the 2068. To date, I’ve only seen one other publication, Mike Felerski‘s excellent “Sinclair Desktop Publishing Journal“, utilizing this great package of programs. Is anyone else out there? I’d like to see some samples. Write, please.
That’s all for now…
J.T.
Media
Note: Type-in program listings on this website use ZMAKEBAS notation for graphics characters.