Letter to Hugh Howie

See all articles from Sinc-Link v11 n5
Author(s): John E. Juergens
Publication: Sinc-Link
Pub Details: Sinc-Link v11 n5 (Volume 11, Issue 5)
Date: September/October 1993
Pages: 23-24

July 28, 1993

John E. Juergens
[address omitted]

Hugh H. Howie
QL Contact
[address omitted]

Dear Hugh,

This is a follow-up to our letter of Jan 9th, reprinted in SINC-LINK’s Jan-Feb ’93 issue.

First, our continuing Gold Card experience(s): Around the beginning of this month MDV 1 on our main QL went to MDV heaven, requiring: 1. Sending the QL off to Dan Elliot, COMPUTER CLASSICS, RT 1, BOX 117, CABOOL MO 65689, and, 2. switching over to our standby QL for interim use.

Over the years, Dan has kept our QLs running with his excellent service and modest prices; I unhesitatingly recommend his work. Our standby QL has always been a bit flakey, originally overheating until Dan put in a Coleco power supply connector. Even then, it seemed to draw a noticeable amount more current than our main machine but did function acceptably.

This last is mentioned only because, after removal of the Gold Card from the main machine to send to Dan and installing it in the standby machine, the Gold Card screen corruption problem intensified. It got to the point where we were averaging 2 to 3 turn-on-off-on sequences per startup just to get a useable screen.

This frustration led me, again, to write Miracle and ask if they had yet solved the problem. Within 10 days we received a second chip, an Ingot 5 (new version) replacing the Ingot 3 which came with our Gold Card. Miracle’s first replacement was an Eprom which did not solve the problem.

The bottom line is that Miracle has solved the problem! No more screen corruptions, period, even on our backup QL. The Gold Card is now an unmitigated pleasure to use.

Secondly, PC Conqueror: Had we not acquired recently an old PC compatible, I would not have known how slow PC Conqueror Gold really is. From the beginning it appeared “somewhat” slow but without the ability to compare, ignorance is blissful. For anyone considering adding PC compatibility to their lives, the rock bottom prices on used machines and DOS applications presents a rare economic opportunity and, in my opinion, overwhelming competition to PC Conqueror.

In our case, US$200 bought a used 286-16 with a 20M hard disk, 2 floppies (360K and 1.44M) and CGA, printer and COM port cards in a package that weighs only slightly less than our refrigerator.

My intial objection to buying a PC was space and clutter considerations. Although that still is valid, the machine itself stands on edge out of the way and the cable-clutter is not as bad as I had initially envisioned.

Our QL has been running since 1986 with a Magnavox amber monitor. The challenge presented by the PC acquistion was to use the same monitor for both machines.

A coax cable was run from the PC’s CGA-RCA jack to a QL TV game switcher to which I had added two RCA jacks – one for the CGA input and the other for monitor output – having unsoldered the twin-lead TV pigtail. It works acceptably on most applications and switching between the QL and PC, even when each is on, seems to do no harm.

The PC’s CGA output and the QL’s composite monochrome output are similar. However, the term “similar” is emphasized. There is an intensity difference between the QL and PC outputs – CGA is much brighter, requiring Contrast &/or Brightness adjustment when switching from one to the other. Further, some PC applications – pixel based screens – require a slight adjustment to the Vertical Hold to stop rolling. However, all adjustments are less difficult than the above would make it appear.

Most of the post-1986 software I’ve tried provide adjustment for the type of card and monitor being used in the applications themselves. However, older applications do not provide for adjustments, eg. with the 1984 Psion PC-4 suite, the prompt and command screens are almost impossible to read due to Psion’s arty use of multi “colours” within letters.

Some PC software will change from being barely readable to readable by simply switching from MODE CO80 to MODE BW80 at the DOS prompt command line or via a line in the AUTOEXEC.BAT file.

PC-Conqueror Gold produces a good screen once software adjustments, if allowed, are made; the PC-4 suite give readable screens. However, when a screen difficulty does arise, it’s a real challenge to get into an application’s utility section and adjust the screen when the screen is unreadable in the first place. One must proceed with a finger and one eye on the documentation and a remaining one of each on the screen searching for something remotely recognizable. Of course, a color monitor would probably solve all of the PC screen problems.

Lastly, was it all worth it? Probably not if one puts no value on challenges or learning. But, otherwise, a resounding maybe!

I’ve yet to come across anything in the PC world that I would regularly use or couldn’t be without. The experience has made it clear to me what a real value the QL-bundled Psion group truly is for the home user.