MASTERFILE
(C) 1984 by Campbell Systems, 57 Traps Hill, Loughton, Essex, IG10 1TD, England
Distributed by RAMEX International, 48945 Van Dyke Road, Utica, Michigan 48087
MASTERFILE is a cute and powerful file program originally written for the Spectrum. This review covers Version 09, converted to run on the T/S 2068 without any type of “Spectrum emulator”.
MASTERFILE is supplied on a cassette which is contained in an attractive book-size binder along with 28 pages of documentation. The program is recorded one time on one side, with the opposite side containing two associated utilities. Documentation contains instructions for preparing “working copies” of the main program and the utilities.
This version of MASTERFILE contains a sampling of a few of the many possible user-defined “report formats”. These should be removed before SAVEing a “working copy” unless they happen to fit ones application. In such a case, the data only may be removed and the sample formats saved.
On loading this version of MASTERFILE, one first encounters “MF notes” which delineates some of the changes made to allow the program to run on the T/S 2068. One of the changes made was to strip off the microdrive instructions. This may prove to be a tactical error, as I have been informed that at least two parties are attempting to convert the Spectrum microdrives to operate on the 2068. Of course the instructions consume memory, but if the microdrives become popular on this side of the pond, they could be restored in “Version 09.xx” at some future date.

“MF notes” concludes with instructions to RUN to view notes again, otherwise LOAD “”, and a STOP statement. Unfortunately, it don’t work that way.
After several unsuccessful tries, I found it was necessary to use CLEAR 57327: LOAD “” (as specified on the cassette) to obtain a proper load. Once this obstacle was overcome, no further problems were encountered with operation of MASTERFILE. I was able to manipulate the sample data, print out the sample report formats on the T/S 2040 printer (see Fig. 1), and establish my own designs and formats.
Utilities included in the main program are worthy of special mention. Microprint (look at Fig. 1 again) is a licensed adaption of a program that is available from Myrmidon Software, P.O. Box 2, Tadworlth, Surrey, KT20 7LU, England. Also included is a utility to draw lines and boxes, such as those shown in Fig. 1. Colors may be selected as desired to highlight the various displays. Data items may contain up to 128 characters, and up to 26 data items may be specified.
Four pages of the documentation concern use of the utilities supplied on the back side of the cassette. These utilities are provided to allow one to utilize what is referred to as “upmarket” (i.e., larger) printers with either Centronics or RS 232 interfaces, the TASMAN being one of those mentioned as compatable. Since I have not yet received the TASMAN, I am unable to comment on this portion of the documentation.
The remainder of the documentation is adequate for an experienced user of this type of programs, but might be difficult for a first-time user. It is my contention that when a program such as this is imported the documentation should be “Americanized”. References to Spectrums, microdrives and such should be purged, and terminology should reflect our usage rather than that of our British cousins. I do not wish to sound insular, but I am a nut on documentation, and try to keep the first-time user in mind when I evaluate it.
Other than stated above, I found MASTERFILE to be a very good and powerful program with many interesting features. I hope to try it soon with the TASMAN interface and big printer and will mention the results in a review of the TASMAN products.