CP/M

Articles (45)

TitleAuthor(s)PublicationDate
Aerco RP/M CP/M on the 2068
CP/M has been available for Aerco FD-68 disk interface owners for quite some time now. it is simply a floppy...
CATS NewsletterFebruary/March 1989
AERCO V.9 RP/M System
І have run into trouble, as many of you know, using RP/M and attempting to read disks for the Morrow...
David BaulchThe Data ExpansionMay 1988
Bugs, Fixes, and Compatibility Notes
Discussion of technical compatibility questions from around the community: interfacing a Commodore 64 disk drive to the TS2068 (reportedly attempted...
Bill HarmerTS BulletinFebruary 1990
Continue.com
I found a fascinating article by David Barry from the St. Louis Osborne Group on the CP/M memory map and...
The Data ExpansionApril 1988
CP/M Corner
Column for CP/M and AERCO RP/M users.
The Sinc Times (2)August 1987
CP/M Corner
Listing of CP/M commands, continued from article in previous issue.
The Sinc Times (2)October 1987
CP/M The Lingua Franca of Operating Systems
Republished from IN Cider.
The Data ExpansionJuly 1988
CP/M The Lingua Franca of Operating Systems
Reprinted from IN Cider.
The Data ExpansionJune 1988
CP/M TipsDavid BaulchThe Data ExpansionAugust 1988
CP/M Utility – OBL4.COM
Recently I downloaded some different software. І have not quite tested it out, but it definitely sounds very good. For...
David BaulchThe Data ExpansionMay 1988
CP/M?SLUG NewsletterSpecial Edition
Designing Operating Systems: A ROM Based O.S. for the Z81
Article describes implementing a smaller operating system, with CP/M as the starting point, on the Sinclair ZX81/TS 1000.
The Computer Journal
DR Assembler Plus Tools Product Brief
I have recently been in contact with Digital Research concerning some of the available products that can enhance your use...
David BaulchThe Data ExpansionSeptember 1988
Editor’s MailbagDavid BaulchThe Data ExpansionMay 1988
Editor’s Mailbag
Correspondence with Pete Fischer about terminal programs for CP/M.
David BaulchThe Data ExpansionJune 1988
Elliam Associates CP/M & MS/PC-DOS Software
I was perusing through the back of some of the latest COMPUTER SHOPPER’s looking for some information on some CP/M...
David BaulchThe Data ExpansionAugust 1988
EZDSZ – Z80 Disassembler
I have just recently received a Z80 Disassembler and manual from Elliam Associates for the AERCO RP/M system I am...
David BaulchThe Data ExpansionSeptember 1988
FOG (First Osborne Group) is the Link Between You and Your Computer
Describes the benefits of belonging to the group.
The Data ExpansionDecember 1987
FOG Letter and Answer
I have been a member of FOG since Derember of 1987. І am writing to tell you that I am...
David BaulchThe Data ExpansionMay 1988
For Your Information: Tidbits About CP/M, TS/TC2068, TC2048, ZX81, TS1500 and QLLISTing NewsletterJuly - September 1986
Further Realizations about CP/M
During this month I have, upon occasion, found myself coming across some problems and not being able to figure them...
David BaulchThe Data ExpansionMarch 1988
Letter from Pete Fischer
I received a pleasant surprise about Thursday of last week, Pete Fischer, co-author of the Telecommunications Guide for Timex Computers,...
David Baulch
Pete Fischer
The Data ExpansionApril 1988
MBASIC BluesDavid BaulchThe Data ExpansionJune 1988
More AERCO RP/M Utilities: SUBREN
Have you even wondered how other computer owners get their machines to do something when they do not have BASIC...
David BaulchThe Data ExpansionFebruary 1988
More Mailbag For The EditorDavid BaulchThe Data ExpansionJune 1988
Overloader ver 1.2 (AERCO)
In the December issue of the newsletter, John Battey, my CO-EDITOR, came up with an exceptional program called OVERLOADER. When...
David BaulchThe Data ExpansionFebruary 1988
Quikpro+II Automatic Program Writer
QUICKPRO+ is a complete File Maintenance/Data Entry Program Generator. It actually writes the program that you design – to an...
David BaulchThe Data ExpansionMay 1988
RP/M Telecommunicating with MODEM7
Since getting a corrected version of MODEM7 to work with the AERCO disk system with RP/M and the 2050 modem,...
David BaulchThe Data ExpansionFebruary 1988
RP/M Utilities – RPMPIP ContinuedDavid BaulchThe Data ExpansionMarch 1988
RP/M Utilities: PRMPIP
You should always make a back-up or archive copy of your favorite or most-often-used programs. I know that, after a...
David BaulchThe Data ExpansionFebruary 1988
RP/M Utility – DU-V89
Naturally during the weekends, I put in some time on the modem downloading some software and utilities that I am...
David BaulchThe Data ExpansionApril 1988
RP/M-CP/M Format Crises Fixed And More
This has been a very good past week, particularly the weekend. I spent part of the time over at the...
David BaulchThe Data ExpansionJune 1988
Some Directory Programs: XDIR, DIRRx, SOxxx and DA21c
The CP/M resident DIR command is very limited. Files are listed in the order they vere put on the disk,...
The Data ExpansionApril 1988
SQ Notes: CP/MSMUG BytesMarch 1989
T/S ResourcesThe RAMTOPMay 1986
The FD-68 Update
Program/routines to switch between Sinclair/Timex mode and CP/M mode on the FD-68.
Update MagazineJuly 1989
The Joys of Assembly
Information about file extensions on CP/M.
The Data ExpansionDecember 1987
The Ultimate Orphan?
How would you like a dirt-cheap computer system that has a real keyboard, high-res (256×192) or very-high-res (640×256) screen display,...
Fred NachbaurThe Data ExpansionApril 1988
The World of CP/MLISTing NewsletterApril 1988
The World of CP/MCATS NewsletterOctober 1987
Timex TidbitsNite-Times NewsFebruary - March 1988
Types of Assemblers
I know that you are familiar with most of the assemblers that are on the market for the Timex system....
David BaulchThe Data ExpansionSeptember 1988
Welcome to the World of CP/M 2.2
Welcome to the world of CP/M 2.2 on your Timex/Sinclair 2068 & the TMX Portugal disk drive(s)! You’ll soon understand...
Jay SiegelFDD NewsletterJanuary 1992
Why Would You Want CP/M+?
The first time I knew that CP/M was available to us via the AERCO disk system and the ZEBRA FDD...
David BaulchThe Data ExpansionApril 1988
Wordstar Version 4.0 Is Here
1 have just recently been introduced to WordStar 3.3. I have tried using this program and found it quite good,...
David BaulchThe Data ExpansionSeptember 1988

Documents (1)

Blog Posts (1)

Scroll to Top